We contacted our supplier and they tried the exact same configuration as
our here. (2k, cusl2-c, scsi drive, etc.)  EXCEPT they used ram with
samsung chipset and it worked.  We were using Hyandai chipset on our
ram.  

FYI:  2000 does not like memory with Hyandai chipset

Or so they say, I'll test the Samsung chipped ram when we get it in and
let everyone know.

Celina James
Information Technology 
Inside Service Manager
PC Net Systems
(913)541-9999
[EMAIL PROTECTED]

-----Original Message-----
From: Roger Seielstad [mailto:[EMAIL PROTECTED]] 
Sent: Thursday, August 16, 2001 3:14 PM
To: NT System Admin Issues
Subject: RE: 2000 Server SP2 Blue dump with 512mb memory


Could it be the memory interleave setting on the motherboard? If the
timing is set to high (ie too few cycles) it could cause that, I
suppose. THat might explain disabling the L1 cache working.

------------------------------------------------------
Roger D. Seielstad - MCSE MCT
Senior Systems Administrator
Peregrine Systems
Atlanta, GA
http://www.peregrine.com


> -----Original Message-----
> From: Celina James [mailto:[EMAIL PROTECTED]]
> Sent: Thursday, August 16, 2001 2:14 PM
> To: NT System Admin Issues
> Subject: RE: 2000 Server SP2 Blue dump with 512mb memory
> 
> 
> DISABLED L1 Cache on CPU = WORKS! (Took 10 minutes to load 2k
> = no thanks)
> 
> This is mega bs, not going to send out 2k server with no cpu caching
> enabled.   I'm switching motherboards as we speak.  Just 
> thought I'd let
> you know that I finally disciphered this one.  WHEW!
> 
> 
> By the way Kevin = ram is good I tried 2nd stick in place of white and

> everything.  I knew ram was good, I tested it swapped it everything.  
> I was in the clear with all hardware possibilities before I
> even posted. I
> won't ever post a problem that is simply " replace the ram ".
> 
> Thanks!
> 
> http://www.sunbelt-software.com/ntsysadmin_list_charter.htm
> 

http://www.sunbelt-software.com/ntsysadmin_list_charter.htm



http://www.sunbelt-software.com/ntsysadmin_list_charter.htm

Reply via email to