could be related then to the snippet I supplied earlier than re: SPD setting.
-----Original Message-----
From: Celina James [mailto:[EMAIL PROTECTED]]
Sent: Thursday, August 16, 2001 1:23 PM
To: NT System Admin Issues
Subject: RE: 2000 Server SP2 Blue dump with 512mb memory
We contacted our supplier and they tried the exact same configuration as
our here. (2k, cusl2-c, scsi drive, etc.) EXCEPT they used ram with
samsung chipset and it worked. We were using Hyandai chipset on our
ram.
FYI: 2000 does not like memory with Hyandai chipset
Or so they say, I'll test the Samsung chipped ram when we get it in and
let everyone know.
Celina James
Information Technology
Inside Service Manager
PC Net Systems
(913)541-9999
[EMAIL PROTECTED]
-----Original Message-----
From: Roger Seielstad [mailto:[EMAIL PROTECTED]]
Sent: Thursday, August 16, 2001 3:14 PM
To: NT System Admin Issues
Subject: RE: 2000 Server SP2 Blue dump with 512mb memory
Could it be the memory interleave setting on the motherboard? If the
timing is set to high (ie too few cycles) it could cause that, I
suppose. THat might explain disabling the L1 cache working.
------------------------------------------------------
Roger D. Seielstad - MCSE MCT
Senior Systems Administrator
Peregrine Systems
Atlanta, GA
http://www.peregrine.com
http://www.sunbelt-software.com/ntsysadmin_list_charter.htm
