RE: Servers get unresponsive

[Gordon W. Smith]

Sounds to me like a browsing issue.  I ran into something similar last week.  You can use browmon and/or browstat in the NT Res kit to troubleshoot this. -----Original Message----- From: Uso S. [mailto:[EMAIL PROTECTED]] Sent: Monday, September 24, 2001 1:44 AM To: NT System Admin Issues Subject: Re: Servers get unresponsive But PING works always. I don't think it's a physical issue.   Uso ----- Original Message ----- From: Joe Krajewski To: NT System Admin Issues Sent: Monday, September 24, 2001 10:42 AM Subject: Re: Servers get unresponsive I would honestly check the basics on those server machines with the problem your describing. Check the cabling to those machines, and check their NICs. Seems like you might need to replace one or the other there. Hope that helps.   -Joe Krajewski   ----- Original Message ----- From: Uso S. To: NT System Admin Issues Sent: Monday, September 24, 2001 2:31 AM Subject: Servers get unresponsive Hi all,   I just joined the list. I have a problem regarding NT 4.0 My environment is 10/100 Switched network on CISCO switches. For some reason I keep loosing network connectivity to servers. A PING works fine but not a NET VIEW (System error 53 has occurred. The network path was not found.) If you try to use any remote tools like Eventviewer etc. it gives you RPC Server unavailable. This keeps coming and going on all servers, and I can't pin point what might be causing it. We have VLANs configured but it doesn't seem to be related to it. The symptomps are the same and don't depend on which VLAN you are on. The Event logs don't show any errors. Using Host or LMHost files didn't help either.   Any ideas?   regards   Uso     http://www.sunbelt-software.com/ntsysadmin_list_charter.htm http://www.sunbelt-software.com/ntsysadmin_list_charter.htm http://www.sunbelt-software.com/ntsysadmin_list_charter.htm http://www.sunbelt-software.com/ntsysadmin_list_charter.htm