Uso,
We faced the similar problem also. Some error regarding pagefile.sys. Had to
move the pagefile location to a different drive and restart the server.
Pradeep Jose
-----Original Message-----
From: Pajor, Gabor (GEL,NonGE,MSX) [mailto:[EMAIL PROTECTED]]
Sent: Monday, September 24, 2001 11:11 AM
To: NT System Admin Issues
Subject: RE: Servers get unresponsive
Uso,
I know this problem, You can try 2 things (2. second will work :-))
First: go to the server, restart the server service (it will stop other
services, but You can restart them later)
If this will not solve the problem, only the restart will help You....
We have this problem sometime, there is no valid solution for this (sp or
patch). We find this mainly on file and print servers if the print queue
number more than 100..., the connected user number higher then 500...
PG
-----Original Message-----
From: Uso S. [mailto:[EMAIL PROTECTED]]
Sent: Monday, September 24, 2001 8:31 AM
To: NT System Admin Issues
Subject: Servers get unresponsive
Hi all,
I just joined the list.
I have a problem regarding NT 4.0
My environment is 10/100 Switched network on CISCO switches.
For some reason I keep loosing network connectivity to servers.
A PING works fine but not a NET VIEW (System error 53 has occurred. The
network path was not found.)
If you try to use any remote tools like Eventviewer etc. it gives you RPC
Server unavailable.
This keeps coming and going on all servers, and I can't pin point what might
be causing it.
We have VLANs configured but it doesn't seem to be related to it. The
symptomps are the same and don't depend on which VLAN you are on.
The Event logs don't show any errors.
Using Host or LMHost files didn't help either.
Any ideas?
regards
Uso
http://www.sunbelt-software.com/ntsysadmin_list_charter.htm
http://www.sunbelt-software.com/ntsysadmin_list_charter.htm
***** This email may be confidential, privileged and/or protected by
copyright. If you are not the intended recipient, you should not copy it,
retransmit it or disclose its contents but should return it to the sender
immediately and delete your copy from your system *****
http://www.sunbelt-software.com/ntsysadmin_list_charter.htm
