Ooohhh, was stuck on http 123... issue a no shut on vlan1
On Wed, Dec 16, 2009 at 8:52 AM, Eldridge, Dave <[email protected]> wrote: > VLAN1 shutdown? > > > > *From:* Don Ely [mailto:[email protected]] > *Sent:* Wednesday, December 16, 2009 9:47 AM > > *To:* NT System Admin Issues > *Subject:* Re: Cisco Switch Setup > > > > You know 123 is the NTP port, right? > > On Wed, Dec 16, 2009 at 8:44 AM, Jeff Johnson <[email protected]> > wrote: > > OK, here is what I have (info taken from “show current-config) > > > > Version 12.1 > > No service pad > > Service timestamps debug uptime > > Service timestamps log uptime > > No service password-encryption > > ! > > Hostname Switch2 > > ! > > Enable password xxxxxxxxxxxxxx > > ! > > Clock timezone Pacific -8 > > Ip subnet-zero > > Ip domain-name hydraflowusa.com > > Ip dhcp-server 192.168.1.3 > > ! > > Spanning-tree extend system-id > > ! > > ! > > > > ! > > Interface Vlan1 > > Ip address 192.168.1.19 255.255.255.0 > > No ip route-cache > > Shutdown > > ! > > Ip default-gateway 192.168.1.2 > > Ip http server > > Ip http port 123 > > ! > > ! > > Line con 0 > > Line vty 0 4 > > Login > > ! > > end > > > > *Jeff Johnson* > > *Systems Administrator* > > 714-773-2600 Office > > 714-773-6351 Fax > > [image: hydraflow] > > > > *From:* Don Ely [mailto:[email protected]] > *Sent:* Wednesday, December 16, 2009 8:25 AM > > > *To:* NT System Admin Issues > > *Subject:* Re: Cisco Switch Setup > > > > Haven't seen anything... Send text... :) > > On Wed, Dec 16, 2009 at 8:20 AM, Jeff Johnson <[email protected]> > wrote: > > Did anyone get my last e-mail with the pictures? I did not get a copy of > it under my “NT System Admin Issues” folder. I wonder if my spam filter > stopped it. If so, I have not seen any replies to it either. > > > > Sorry, > > > > *Jeff Johnson* > > *Systems Administrator* > > 714-773-2600 Office > > 714-773-6351 Fax > > [image: hydraflow] > > > > *From:* Jason Morris [mailto:[email protected]] > *Sent:* Wednesday, December 16, 2009 7:51 AM > *To:* NT System Admin Issues > *Subject:* RE: Cisco Switch Setup > > > > You most likely don’t have the HTTP server command enabled. > > > > If you can’t telnet to it, then you need to set an access password on VTY 0 > 4…but I prefer SSH instead. > > So something like… > > > > Conf t > > Line Vty 0 4 > > Login (or login local) > > Password hereismycoolpassword > > > > > > Jason > > > > *From:* Bob Fronk [mailto:[email protected]] > *Sent:* Wednesday, December 16, 2009 9:40 AM > *To:* NT System Admin Issues > *Subject:* RE: Cisco Switch Setup > > > > Telnet or ssh to them? > > > > If that is not an option, then use a console server. (I use a Raritan > Console server for switches and routers in my server room) > > > > *From:* Jeff Johnson [mailto:[email protected]] > *Sent:* Wednesday, December 16, 2009 10:30 AM > *To:* NT System Admin Issues > *Subject:* OT: Cisco Switch Setup > > > > I am having difficulties setting up a Cisco Catalyst 2950 Switch with a > network connection. I have 8 of them and would like to manage them from my > desk rather than physically in the server room, switching the console cable > for each one. > > > > I have already assigned a VLAN1 ip address with subnet and a default > gateway. I have assigned a different HTTP port. Unfortunately, that is > where I sit and am still unable to connect via browser. > > > > If anyone is willing to help me I would appreciate it. This could be > direct e-mail rather than through the forum. > > > > Thanks, > > > > *Jeff Johnson* > > *Systems Administrator* > > 714-773-2600 Office > > 714-773-6351 Fax > > [image: hydraflow] > > > > > > > > > > > > > > > > ------------------------------------------------------------------------------------------ > > The pages accompanying this email transmission contain information from MJMC, > Inc., which > > is confidential and/or privileged. The information is to be for the use of > the individual > > or entity named on this cover sheet. If you are not the intended recipient, > you are > > hereby notified that any disclosure, dissemination, distribution, or copying > of this > > communication is strictly prohibited. If you received this transmission in > error, please > > immediately notify us by telephone so that we can arrange for the retrieval > of the original > > document. > > > > > > > > > > > > > > > > > > > > > > This e-mail contains the thoughts and opinions of the sender and does not > represent official Parkview Medical Center policy. > > This communication is intended only for the recipient(s) named above, may > be confidential and/or legally privileged: and, must be treated as such in > accordance with state and federal laws. If you are not the intended > recipient, you are hereby notified that any use of this communication, or > any of its contents, is prohibited. If you have received this communication > in error, please return to sender and delete the message from your computer > system.{token} > > > > > > ~ Finally, powerful endpoint security that ISN'T a resource hog! ~ ~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/> ~
<<image001.jpg>>
