Oops. I meant Kurt not Ken in my reply to Ben. > Date: Sun, 19 Jun 2011 20:25:24 -0700 > Subject: Re: vlan issue > From: [email protected] > To: [email protected] > > On Sun, Jun 19, 2011 at 13:10, <[email protected]> wrote: > > I am trying to get a vlan working between a Procurve 2810 and my Cisco core > > switch (4510). > > > > On the Cisco side: > > > > Show ip route: > > > > Gateway of last resort is 192.168.100.9 to network 0.0.0.0 > > > > C 172.30.0.0/16 is directly connected, Vlan15 > > S* 0.0.0.0/0 [1/0] via 192.168.100.9 > > C 192.168.0.0/16 is directly connected, Vlan1 > > > > Show int vlan15: > > > > Vlan15 is up, line protocol is up > > Hardware is Ethernet SVI, address is c47d.4fe6.e97f (bia c47d.4fe6.e97f) > > Internet address is 172.30.1.1/16 > > > > > > On the Procurve side: > > > > Procurve gateway is IP of my core switch. > > I have Vlan15 with ip of 172.30.1.1. > > > > Port 5 is Tagged and member of Vlan15. > > > > Assume device in port 5 is a laptop with IP of 172.30.1.10. > > > > From the laptop I can ping the Procurve switch but anything on the 4510 side > > (native vlan) > > The Procurve can ping the laptop and also ping core switch and anything on > > native vlan. > > > > The 4510 ping to the laptop fails. > > > > If this was just Cisco, I would guess it to be a trunking problem but I > > understand Procurve trunking is like Cisco's etherchannel. > > > > However, it seems to be a routing issue but I'm at a loss where to go from > > here. > > Any help would be greatly appreciated! > > Do all VLANs match for IP subnet across the two switches? Is the same > VLAN configured on the Cisco and HP as primary/native? Is the > management VLAN the same on both, and have the same subnet and DG? > > When you say for the HP that "Port 5 is Tagged and member of Vlan15", > what exactly does 'sho conf' reveal for that VLAN? Ditto on the Cisco. > > Kurt > > ~ Finally, powerful endpoint security that ISN'T a resource hog! ~ > ~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/> ~ > > --- > To manage subscriptions click here: > http://lyris.sunbelt-software.com/read/my_forums/ > or send an email to [email protected] > with the body: unsubscribe ntsysadmin > ~ Finally, powerful endpoint security that ISN'T a resource hog! ~ ~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/> ~
--- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to [email protected] with the body: unsubscribe ntsysadmin
