Set g/w on client pc to svi on the 4510. On uplink port, tag vlan15 and untag default vlan. On port that pc plugs into, untag vlan15 and tag default vlan.
> Date: Thu, 30 Jun 2011 08:57:20 -0700 > Subject: Re: vlan issue > From: [email protected] > To: [email protected] > > So, what was the fix? > > On Thu, Jun 30, 2011 at 08:19, <[email protected]> wrote: > > Finally got a chance to work on this. Thanks for the tips. I got the vlan > > working properly between the Cisco 4510 and the Procurve. (I had not > > problem with Cisco to Cisco; I'm just not that experienced with the > > Procurves. > > > >> From: [email protected] > >> Date: Sun, 19 Jun 2011 20:55:37 -0400 > >> Subject: Re: vlan issue > >> To: [email protected] > >> > >> On Sun, Jun 19, 2011 at 4:10 PM, <[email protected]> wrote: > >> > Show ip route: > >> > >> VLANs and IP routing are two different layers. Conflating the two > >> leads to confusion. > >> > >> > From the laptop I can ping the Procurve switch but anything on the 4510 > >> > side (native vlan) > >> > >> The above sentence appears to be missing words. > >> > >> > If this was just Cisco, I would guess it to be a trunking problem but I > >> > understand Procurve trunking is like Cisco's etherchannel. > >> > >> "VLAN trunks" are a Ciscoism that doesn't exist in the 802.1Q > >> protocol. An Ethernet frame either has a VLAN tag, or it doesn't. If > >> it has a tag, the tag specifies the VLAN the frame is associated with. > >> If a frame lacks a tag, it's up to the switch to decide what to do > >> with the frame. It's also up to the switch to decide what frames to > >> emit on a port, and if/how to tag them. > >> > >> IIRC, in Cisco-land, a "VLAN trunk port" is a port that tags all > >> frames it emits, and expects to receive the same. > >> > >> Here's my standard response to VLAN questions: > >> > >> > >> http://www.mail-archive.com/[email protected]/msg58753.html > >> > >> -- Ben > >> > >> ~ Finally, powerful endpoint security that ISN'T a resource hog! ~ > >> ~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/> ~ > >> > >> --- > >> To manage subscriptions click here: > >> http://lyris.sunbelt-software.com/read/my_forums/ > >> or send an email to [email protected] > >> with the body: unsubscribe ntsysadmin > > > > ~ Finally, powerful endpoint security that ISN'T a resource hog! ~ > > ~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/> ~ > > > > --- > > To manage subscriptions click here: > > http://lyris.sunbelt-software.com/read/my_forums/ > > or send an email to [email protected] > > with the body: unsubscribe ntsysadmin > > ~ Finally, powerful endpoint security that ISN'T a resource hog! ~ > ~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/> ~ > > --- > To manage subscriptions click here: > http://lyris.sunbelt-software.com/read/my_forums/ > or send an email to [email protected] > with the body: unsubscribe ntsysadmin > ~ Finally, powerful endpoint security that ISN'T a resource hog! ~ ~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/> ~ --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to [email protected] with the body: unsubscribe ntsysadmin
