Does anybody here some problem on run nupic using XCode? If not, I will consider that is issue is Ok and I'll move foward with other issues.
David On 8 August 2013 11:38, Matthew Taylor <[email protected]> wrote: > David, > > That's great! The more ways people can build and run our code, the better. > Any reason why you didn't just put these changes into a pull request and > submit them to the repo? > > --------- > Matt Taylor > OS Community Flag-Bearer > Numenta > > > On Wed, Aug 7, 2013 at 6:22 PM, David Ragazzi <[email protected]>wrote: > >> One another idea is put the code to run the test in Install scheme in >> order to Xcode performs operations from setup to debug/tests. >> >> >> On 7 August 2013 21:50, David Ragazzi <[email protected]> wrote: >> >>> Hi guys, >>> >>> It seems that I managed setup and install Nupic by Xcode.. :-) >>> >>> The question is that Xcode use 2 schemes: >>> -setup-install: it's preparation of the environment itself >>> -install: it's build >>> >>> When we use only the shell, both schemes are performed >>> by "build.sh" file. >>> >>> So, from I understood, one should first set the project to >>> "setup-install" sheme and run it. And then definitively set the project to >>> "install" scheme to perform new builds. >>> >>> The python config file for "setup-install" is "/(your project >>> folder)/build_system/contrib/xcode-setup-install.py" >>> The python config file for "install" is "/(your project >>> folder)/build_system/contrib/make.py" >>> >>> Both files were bugged and I fixed them. >>> >>> For those know the shell file, you will note that instructions are very >>> similar. I still don't checked all differences between them, i.e. the shell >>> file and the Py files, but it's extremely worth do this. >>> >>> Let's go to the fixes.. >>> >>> Install: When you try run the project, it shows an error that is related >>> to a build directory that don't exists, so I changed it to "/tmp/ntabuild" >>> that is the same directory used by the shell file. >>> Setup-Install: When you try run the project, it show an error that is >>> related to configure.py file, the problem is that the buildStyle is always >>> empty in "configureCmd += ' --mode=%s' % buildStyle". I don't know why >>> os.environ['BUILD_STYLE'] doesn't working. Anyway, I changed this line >>> to "configureCmd += ' --mode=release'". I know this is an horrible hack but >>> this is until we realize why os.environ['BUILD_STYLE'] is empty. >>> >>> My settings: >>> OSX 10.7.2 (Lion) >>> XCode 4.2 >>> >>> I attached the 2 files with the changes. Note that I still didn't run >>> the tests by Xcode, only the builds that presented "Success" messages, but >>> I believe we are in good progress. >>> >>> Cheers, David >>> >>> >>> >>> >>> >>> >>> >>> On 7 August 2013 14:44, Patrick Higgins <[email protected]> wrote: >>> >>>> I tried that: >>>> >>>> make: *** No rule to make target `install'. Stop. >>>> Build failed. Error 512 >>>> Command build_system/contrib/make.py failed with exit code 1 >>>> >>>> >>>> I've got to get to work, but I'll take a look at this >>>> later today when I'm done drafting... >>>> >>>> >>>> >>>> Patrick >>>> >>>> On Aug 7, 2013, at 10:20 AM, David Ragazzi wrote: >>>> >>>> > Hi Patrick, >>>> > >>>> > It is the same problem I got. You should create >>>> '/Users/Patrick/nupic-master/build/Debug' manually. >>>> > >>>> > David >>>> >>>> >>>> _______________________________________________ >>>> nupic mailing list >>>> [email protected] >>>> http://lists.numenta.org/mailman/listinfo/nupic_lists.numenta.org >>>> >>> >>> >> >> _______________________________________________ >> nupic mailing list >> [email protected] >> http://lists.numenta.org/mailman/listinfo/nupic_lists.numenta.org >> >> > > _______________________________________________ > nupic mailing list > [email protected] > http://lists.numenta.org/mailman/listinfo/nupic_lists.numenta.org > >
_______________________________________________ nupic mailing list [email protected] http://lists.numenta.org/mailman/listinfo/nupic_lists.numenta.org
