I don't have any other ideas. The current release version is 0.3.1, which is higher than 0.3.1.dev0. In release 0.3.1, there is a new dependency for the latest version of nupic.bindings, which needed to be bumped to version 0.2.
Please try to install once again from the latest source or from binary. Thanks, --------- Matt Taylor OS Community Flag-Bearer Numenta On Thu, Sep 17, 2015 at 6:34 PM, 付亚静 <[email protected]> wrote: > Hi > Matt Taylor > Are you sure I need to update the NuPIC version again? The $NUPIC/VERSION > shows it is 0.3.1.dev0. In addition, no matter how many time I input > command "pip uninstall nupic.bindings -y", the result is I didn't installed > it. > > abc@abc-VirtualBox:/newdisk$ pip uninstall nupic.bindings -y > Cannot uninstall requirement nupic.bindings, not installed > Storing complete log in /home/abc/.pip/pip.log > > Is it normal？ > > Yajingfu > ------------------ 原始邮件 ------------------ > 发件人: "Matthew Taylor";<[email protected]>; > 发送时间: 2015年9月18日(星期五) 上午7:43 > 收件人: "付亚静"<[email protected]>; > 主题: Re: 回复： 回复： How to update the newest NuPIC version > > Yajingfu, > > I just sent this message: > http://lists.numenta.org/pipermail/nupic_lists.numenta.org/2015-September/011719.html > > Can you try re-installing following those instructions? > --------- > Matt Taylor > OS Community Flag-Bearer > Numenta > > > On Thu, Sep 17, 2015 at 4:25 PM, 付亚静 <[email protected]> wrote: >> Yes, it is all the output. >> >> Yajingfu >> >> >> >> ------------------ 原始邮件 ------------------ >> 发件人: "Matthew Taylor";<[email protected]>; >> 发送时间: 2015年9月18日(星期五) 凌晨1:05 >> 收件人: "付亚静"<[email protected]>; >> 主题: Re: 回复： 回复： How to update the newest NuPIC version >> >> Is this really all the output you get when you run? >> >>>>./scripts/run_nupic_tests -u >> ============================= test session starts >> ============================== >> platform linux2 -- Python 2.7.3 -- pytest-2.4.2 -- /usr/bin/python >> plugins: xdist, cov >> collecting 170 items / 3 errors >> >> When I run `./scripts/run_nupic_tests -u` there are hundreds of lines >> of test reports output. >> >> --------- >> Matt Taylor >> OS Community Flag-Bearer >> Numenta >> >> >> On Thu, Sep 17, 2015 at 5:24 AM, 付亚静 <[email protected]> wrote: >>> >>> Hi >>> Matt Taylor >>> I think the test result of "./scripts/run_nupic_tests -u" mentioned in >>> previous email is incorrect. It shows "collecting 170 items / 3 errors". >>> And >>> I need to use the example in >>> $nupic/examples/network/hierarchy_network_demo.py which can run >>> correctly. >>> Do you have any advice? Thank you so much. >>> >>> Yajingfu >>> >>> ------------------ 原始邮件 ------------------ >>> 发件人: "付亚静";<[email protected]>; >>> 发送时间: 2015年9月16日(星期三) 上午10:22 >>> 收件人: "付亚静"<[email protected]>; >>> 主题: 回复： 回复： 回复： How to update the newest NuPIC version >>> >>> Hi >>> >>>>>./scripts/run_nupic_tests -u >>> ============================= test session starts >>> ============================== >>> platform linux2 -- Python 2.7.3 -- pytest-2.4.2 -- /usr/bin/python >>> plugins: xdist, cov >>> collecting 170 items / 3 errors >>> >>>>>./scripts/run_nupic_tests -i >>> 73 passed, 5 skipped in 264.26 seconds >>> >>> Yajingfu >>> >>> ------------------ 原始邮件 ------------------ >>> 发件人: "Matthew Taylor";<[email protected]>; >>> 发送时间: 2015年9月15日(星期二) 晚上10:22 >>> 收件人: "付亚静"<[email protected]>; >>> 主题: Re: 回复： 回复： How to update the newest NuPIC version >>> >>> Test it like this: >>> >>> Unit tests: >>> ./scripts/run_nupic_tests -u >>> Integration tests: >>> ./scripts/run_nupic_tests -i >>> --------- >>> Matt Taylor >>> OS Community Flag-Bearer >>> Numenta >>> >>> >>> On Mon, Sep 14, 2015 at 11:44 PM, 付亚静 <[email protected]> wrote: >>>> Hi >>>> Matt Taylor >>>> Thank you for your reply. I did just as what you said. The file setup.py >>>> has >>>> been complied correctly. Then I tested it. But there is no such >>>> directory >>>> of >>>> $NUPIC/bin >>>> >>>> abc@abc-VirtualBox:/newdisk$ $NUPIC/bin/py_region_test >>>> bash: /newdisk/nupic/bin/py_region_test: No such file or directory >>>> >>>> And I was intended to run >>>> $NUPIC/examples/network/hierachy-demo-output.py >>>> but failed. >>>> >>>> /usr/bin/python2.7 >>>> /newdisk/nupic/examples/network/hierarchy_network_demo.py >>>> Creating network >>>> Running network >>>> Writing output to: >>>> /newdisk/nupic/examples/network/hierarchy-demo-output.csv >>>> Traceback (most recent call last): >>>> File "/newdisk/nupic/examples/network/hierarchy_network_demo.py", line >>>> 368, in <module> >>>> runDemo() >>>> File "/newdisk/nupic/examples/network/hierarchy_network_demo.py", line >>>> 362, in runDemo >>>> runNetwork(network, numRecords, writer) >>>> File "/newdisk/nupic/examples/network/hierarchy_network_demo.py", line >>>> 305, in runNetwork >>>> network.run(1) >>>> File "/newdisk/nupic/nupic/engine/__init__.py", line 666, in run >>>> engine.Network.run(self, n) >>>> File >>>> >>>> >>>> >>>> "/home/abc/.local/lib/python2.7/site-packages/nupic.bindings-0.1.5-py2.7-linux-x86_64.egg/nupic/bindings/engine_internal.py", >>>> line 1146, in run >>>> return _engine_internal.Network_run(self, *args, **kwargs) >>>> File "/newdisk/nupic/nupic/regions/CLAClassifierRegion.py", line 289, >>>> in >>>> compute >>>> categories = [category for category in inputs["categoryIn"] >>>> KeyError: 'categoryIn' >>>> >>>> Yajingfu >>>> >>>> ------------------ 原始邮件 ------------------ >>>> 发件人: "Matthew Taylor";<[email protected]>; >>>> 发送时间: 2015年9月15日(星期二) 中午12:52 >>>> 收件人: "付亚静"<[email protected]>; >>>> 主题: Re: 回复： 回复： How to update the newest NuPIC version >>>> >>>> Sorry, wrong command. >>>> >>>> git reset --hard origin/master >>>> >>>> Sent from my MegaPhone >>>> >>>> On Sep 14, 2015, at 8:58 PM, 付亚静 <[email protected]> wrote: >>>> >>>> Hi >>>> Matt Taylor >>>> That's very kind of you and thank you for your detailed explanation. But >>>> I >>>> can't hard reset. >>>> >>>> abc@abc-VirtualBox:/newdisk/nupic$ git reset --hard origin master >>>> fatal: Cannot do hard reset with paths. >>>> >>>> abc@abc-VirtualBox:/newdisk/nupic$ python --version >>>> Python 2.7.3 >>>> >>>> abc@abc-VirtualBox:/newdisk/nupic$ pip --version >>>> pip 1.0 from /usr/lib/python2.7/dist-packages (python 2.7) >>>> >>>> abc@abc-VirtualBox:/newdisk/nupic$ gcc --version >>>> gcc (Ubuntu 4.8.1-2ubuntu1~12.04) 4.8.1 >>>> Copyright (C) 2013 Free Software Foundation, Inc. >>>> This is free software; see the source for copying conditions. There is >>>> NO >>>> warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR >>>> PURPOSE. >>>> >>>> abc@abc-VirtualBox:/newdisk/nupic$ cat /etc/issue >>>> Ubuntu 12.04.5 LTS \n \l >>>> >>>> I'm confused with so many git commands and not sure what's the meaning >>>> of >>>> "checked out" in "assuming $NUPIC is where you have it checked out". >>>> Some >>>> info about my nupic are showed as follows: >>>> >>>> abc@abc-VirtualBox:/newdisk/nupic$ git branch -a >>>> * master >>>> remotes/origin/HEAD -> origin/master >>>> remotes/origin/add-nupic-linux64-back >>>> remotes/origin/add_capnp_to_SPRegion >>>> remotes/origin/core-update-09190c1b465a0ef5268cfb40ea03194fd1ee06a5 >>>> remotes/origin/core-update-09f8350ef49aa2404a3aaab32200d99793fb17c4 >>>> remotes/origin/core-update-0a891f27d137825e1d29870cb2a2df7ac33f5b65 >>>> remotes/origin/core-update-0c815c2b84d92d0ca1a81beca2bed7e3d3ce6776 >>>> remotes/origin/core-update-0d5eb8452229a42352e77c69f4300165c3d6f834 >>>> remotes/origin/core-update-140a176ef1f53bb5014e60cec5a26ecc0498d23e >>>> remotes/origin/core-update-241986490135472f5b2a33fc54de41ff3fc90871 >>>> remotes/origin/core-update-26f27da204948ad6858a722627acf700722de195 >>>> remotes/origin/core-update-3b6eeb2af09b8e1f4def918c98b013fe49acea46 >>>> remotes/origin/core-update-3ee66ab918b3673e347f6cd38d92f3498c0a835e >>>> remotes/origin/core-update-412871e85dec5a195f7f59c01ca87100bfd5f346 >>>> remotes/origin/core-update-42d66a13dffc2647ea852ed4d2632f751b66ecf4 >>>> remotes/origin/core-update-4ef1f6e560af555f1f53f457d0400dc4c3a67658 >>>> remotes/origin/core-update-504f3616c52d3809bc056da1726aefc4d1cdacb7 >>>> remotes/origin/core-update-54faae374b409b8874feeeec40b2644eec6cddc1 >>>> remotes/origin/core-update-603ee4b04b3c2b8d444b0b98aef7ff1cfaa4d6c6 >>>> remotes/origin/core-update-60a82001f0f8a6ed2a8097571653bfe0f1976683 >>>> remotes/origin/core-update-633368e394c3de72e93e401efcd8e91ec30abf53 >>>> remotes/origin/core-update-6485cd327fbdcf3bb6d15260468ff5e1da5f9753 >>>> remotes/origin/core-update-66de57d6294575ad36343a8ab8d1e0697e1789dc >>>> remotes/origin/core-update-6729b0a634b3fa74b76fd7065ea0c426b33a0808 >>>> remotes/origin/core-update-69af1b6750198c7b37d974b161bdd0c425fc0a2c >>>> remotes/origin/core-update-6d83da85e1375cb0bc961dc79e95b3269f6ff4ae >>>> remotes/origin/core-update-701eb9a1b57f7da33a3a84f800982915a628c6af >>>> remotes/origin/core-update-706b5682b35e0f78ce1a36c0e7100d109b04ed54 >>>> remotes/origin/core-update-72da8988209e95845bead91b7a91e1312939dd78 >>>> remotes/origin/core-update-7618a54a7f0e7530da5d1f5e4e5a053675d6ad5c >>>> remotes/origin/core-update-78fb04c13f6255cc491a28ac296b9b50c252913a >>>> remotes/origin/core-update-7b51f6c24659b732584b51bc61e85ff34eef4d53 >>>> remotes/origin/core-update-7b9742fa4494dde6a716da0a84fcf791dbcab2b7 >>>> remotes/origin/core-update-82b9a97937b17d9a2c32e9d89bca6e1fe1eea923 >>>> remotes/origin/core-update-908600dc1e8f35a2a5c848e0af2e708948886aeb >>>> remotes/origin/core-update-917f48c0de7c47359c92487db7c4967020140a45 >>>> remotes/origin/core-update-9218471fcdba9ea87b7f372d92d217d9553817a7 >>>> remotes/origin/core-update-a13e5de360287a8c4b63675ca170b9d4556eaedf >>>> remotes/origin/core-update-a23a6df1aff8e475ec6995d8b6f48cae83e8dbb4 >>>> remotes/origin/core-update-a25068f00bde589f029e0cfc94ac3343bfaa9254 >>>> remotes/origin/core-update-a5b35e6619dbfe1130dc4785bf92d7df3fba6cb5 >>>> remotes/origin/core-update-ad25c77d3e30f1029816aabf17ea4d387fff3ea3 >>>> remotes/origin/core-update-b4bdca9627857a5076f7e40f46cba1efa3284872 >>>> remotes/origin/core-update-b70bfd70f9fd7176c160a775533e3b0523d1db7e >>>> remotes/origin/core-update-b71a593077f5e49c780b0002629b5e8966f61b36 >>>> remotes/origin/core-update-bc25849db6815d379afb5b539e27c8565e6417f0 >>>> remotes/origin/core-update-c6f634cabfba545545faa0ef901a566f7a7fd70e >>>> remotes/origin/core-update-cb55ebd9633923040176db0c041945f190d69800 >>>> remotes/origin/core-update-cca41015071df968ba79ab7b9625f68de2cd4e1d >>>> remotes/origin/core-update-d41566a1b1448dcdd3b1a846ce14d18b63be2f18 >>>> remotes/origin/core-update-da34067f70ffcd71aa56781fe0e4aa1ced81ff79 >>>> remotes/origin/core-update-de7052fa535cb55ba97d6dd37950d9aab998b35c >>>> remotes/origin/core-update-eb0b420973f54536debd9d13334a88cdc05bf5c1 >>>> remotes/origin/core-update-f413775712bed847fb94e2abb9c20c546fb4d44c >>>> remotes/origin/core-update-f55119a2f255fa4961b9c44ecb5261076bb4db0a >>>> remotes/origin/core-update-fd7757d57fe4ba873156963f961567a5a6f42f43 >>>> remotes/origin/core-update-ffb81006c38ac9c1bdd2c161c91211d556ec1805 >>>> remotes/origin/master >>>> remotes/origin/revert-1482-scalar-space-encoder >>>> >>>> >>>> abc@abc-VirtualBox:/newdisk/nupic$ git status >>>> # On branch master >>>> # Your branch is ahead of 'origin/master' by 2 commits. >>>> # >>>> # Untracked files: >>>> # (use "git add <file>..." to include in what will be committed) >>>> # >>>> # bin/ >>>> # examples/AD_fyj/ >>>> # examples/fyj/ >>>> # examples/network/hierarchy-demo-output.csv >>>> # examples/network/network-demo-output.csv >>>> # examples/network/test_output.csv >>>> # examples/opf/clients/hotgym/anomaly/anomaly_scores.csv >>>> # examples/opf/clients/hotgym/anomaly/one_gym/rec-center-hourly_out.csv >>>> # >>>> >>>> >>>> >>>> examples/opf/clients/hotgym/prediction/one_gym/model_params/rec_center_hourly_model_params.py >>>> # examples/opf/clients/hotgym/prediction/one_gym/swarm/ >>>> # fake-extension.so >>>> # nupic/bindings/_algorithms.so >>>> # nupic/bindings/_engine_internal.so >>>> # nupic/bindings/_math.so >>>> # nupic/bindings/algorithms.py >>>> # nupic/bindings/algorithms_wrap.cxx >>>> # nupic/bindings/engine_internal.py >>>> # nupic/bindings/engine_internal_wrap.cxx >>>> # nupic/bindings/math.py >>>> # nupic/bindings/math_wrap.cxx >>>> # nupic/bindings/proto/BitHistory.capnp >>>> # nupic/bindings/proto/ClaClassifier.capnp >>>> # nupic/bindings/proto/ConnectionsProto.capnp >>>> # nupic/bindings/proto/RandomProto.capnp >>>> # nupic/bindings/proto/SparseBinaryMatrixProto.capnp >>>> # nupic/bindings/proto/SparseMatrixProto.capnp >>>> # nupic/bindings/proto/SpatialPoolerProto.capnp >>>> # nupic/libcpp_region.so >>>> nothing added to commit but untracked files present (use "git add" to >>>> track) >>>> >>>> Yajingfu >>>> ------------------ 原始邮件 ------------------ >>>> 发件人: "Matthew Taylor";<[email protected]>; >>>> 发送时间: 2015年9月15日(星期二) 凌晨0:57 >>>> 收件人: "付亚静"<[email protected]>; >>>> 主题: Re: 回复： How to update the newest NuPIC version >>>> >>>> Yajingfu, >>>> >>>> Try this, so we can start from scratch. These git commands will ensure >>>> that your working directory is up to date and clean (this will destroy >>>> any local changes you have not committed): >>>> >>>> cd $NUPIC # assuming $NUPIC is where you have it checked out >>>> git fetch origin >>>> git reset --hard origin master >>>> git clean -dfx >>>> >>>> Now again make sure everything is uninstalled: >>>> >>>> pip uninstall nupic -y >>>> pip uninstall nupic.bindings -y >>>> >>>> Run those two commands a few times until they tell you nothing is >>>> installed. Then try to install from scratch: >>>> >>>> python setup.py install >>>> >>>> You may need to add the "--user" option for the command above if you >>>> have permission issues. >>>> >>>> If this does not work, please tell us some extra info: >>>> - python version >>>> - pip version >>>> - OS details (Linux flavor?) >>>> - gcc version >>>> >>>> I hope that helps, >>>> >>>> >>>> >>>> --------- >>>> Matt Taylor >>>> OS Community Flag-Bearer >>>> Numenta >>>> >>>> >>>> On Sun, Sep 13, 2015 at 7:19 PM, 付亚静 <[email protected]> wrote: >>>>> Hi NuPIC >>>>> I wonder what else I can do for the problem. Can anyone help me? >>>>> Thank >>>>> you so much！ >>>>> >>>>> Yajingfu >>>>> >>>>> >>>>> ------------------ 原始邮件 ------------------ >>>>> 发件人: "付亚静";<[email protected]>; >>>>> 发送时间: 2015年9月11日(星期五) 晚上11:16 >>>>> 收件人: "付亚静"<[email protected]>; >>>>> 主题: 回复： 回复： How to update the newest NuPIC version >>>>> >>>>> Hi >>>>> >>>>> I tried the two commands and had some version conflict. For >>>>> example，VersionConflict: (pytest 2.7.2 >>>>> (/usr/local/lib/python2.7/dist-packages), >>>>> Requirement.parse('pytest==2.4.2'))。 >>>>> >>>>> so I reinstalled them and it shows like this: >>>>> >>>>> abc@abc-VirtualBox:/newdisk$ pip uninstall nupic -y >>>>> Uninstalling nupic: >>>>> Successfully uninstalled nupic >>>>> abc@abc-VirtualBox:/newdisk$ pip uninstall nupic.bindings -y >>>>> Cannot uninstall requirement nupic.bindings, not installed >>>>> Storing complete log in /home/abc/.pip/pip.log >>>>> >>>>> but it still has the same problem: >>>>> >>>>> abc@abc-VirtualBox:/newdisk/nupic$ python setup.py build >>>>> error in nupic setup command: 'install_requires' must be a string or >>>>> list >>>>> of >>>>> strings containing valid project/version requirement specifiers >>>>> >>>>> What should I do next? >>>>> >>>>> ------------------ 原始邮件 ------------------ >>>>> 发件人: "Matthew Taylor";<[email protected]>; >>>>> 发送时间: 2015年9月11日(星期五) 晚上10:33 >>>>> 收件人: "付亚静"<[email protected]>; >>>>> 主题: Re: 回复： How to update the newest NuPIC version >>>>> >>>>> Try uninstalling any old versions of nupic: >>>>> >>>>> >>>>> >>>>> >>>>> https://github.com/numenta/nupic/wiki/Build-and-Installation-FAQ#im-having-trouble-updating-to-a-newer-version-of-nupic >>>>> >>>>> Then run "python setup.py build" again? >>>>> --------- >>>>> Matt Taylor >>>>> OS Community Flag-Bearer >>>>> Numenta >>>>> >>>>> >>>>> On Fri, Sep 11, 2015 at 2:38 AM, 付亚静 <[email protected]> wrote: >>>>>> >>>>>> HI >>>>>> >>>>>> I took a snapshot before. So I recovered it and installed numpy 1.9.2 >>>>>> and >>>>>> py.test at first successfully. Then I pulled and get the newest >>>>>> version. >>>>>> But it can't be build seccufully. >>>>>> >>>>>> My steps are as follows. >>>>>> >>>>>>>>git commit -a >>>>>>>>git pull >>>>>> remote: Counting objects: 4, done. >>>>>> remote: Compressing objects: 100% (4/4), done. >>>>>> remote: Total 4 (delta 0), reused 0 (delta 0), pack-reused 0 >>>>>> Unpacking objects: 100% (4/4), done. >>>>>> From https://github.com/numenta/nupic >>>>>> f2f1824..e6362c7 master -> origin/master >>>>>> * [new branch] >>>>>> core-update-4ef1f6e560af555f1f53f457d0400dc4c3a67658 >>>>>> -> >>>>>> origin/core-update-4ef1f6e560af555f1f53f457d0400dc4c3a67658 >>>>>> Merge made by the 'recursive' strategy. >>>>>> .nupic_modules | 2 +- >>>>>> 1 file changed, 1 insertion(+), 1 deletion(-) >>>>>> >>>>>>>>python setup.py build >>>>>> error in nupic setup command: 'install_requires' must be a string or >>>>>> list >>>>>> of >>>>>> strings containing valid project/version requirement specifiers >>>>>> >>>>>> It's too strange. I can't solve it. So asking for help. Thank you. :) >>>>>> >>>>>> ------------------ 原始邮件 ------------------ >>>>>> 发件人: "Matthew Taylor";<[email protected]>; >>>>>> 发送时间: 2015年9月10日(星期四) 晚上11:43 >>>>>> 收件人: "付亚静"<[email protected]>; >>>>>> 主题: Re: 回复： How to update the newest NuPIC version >>>>>> >>>>>> What does this show? >>>>>> >>>>>>> which pytest >>>>>> >>>>>> >>>>>> --------- >>>>>> Matt Taylor >>>>>> OS Community Flag-Bearer >>>>>> Numenta >>>>>> >>>>>> On Tue, Sep 8, 2015 at 9:24 PM, 付亚静 <[email protected]> wrote: >>>>>>> >>>>>>> >>>>>>> I searched and found https://github.com/numenta/nupic/issues/2008 was >>>>>>> similar to my problem. So I input command "sudo pip install -U >>>>>>> pytest" >>>>>>> depending on http://pytest.org/latest/getting-started.html just like >>>>>>> this: >>>>>>> >>>>>>> abc@abc-VirtualBox:~$ sudo pip install -U pytest >>>>>>> Downloading/unpacking pytest >>>>>>> Running setup.py egg_info for package pytest >>>>>>> >>>>>>> Downloading/unpacking py>=1.4.29 (from pytest) >>>>>>> Running setup.py egg_info for package py >>>>>>> >>>>>>> Installing collected packages: pytest, py >>>>>>> Found existing installation: pytest 2.7.2 >>>>>>> Uninstalling pytest: >>>>>>> Successfully uninstalled pytest >>>>>>> Running setup.py install for pytest >>>>>>> >>>>>>> Installing py.test script to /usr/local/bin >>>>>>> Installing py.test-2.7 script to /usr/local/bin >>>>>>> Found existing installation: py 1.4.30 >>>>>>> Uninstalling py: >>>>>>> Successfully uninstalled py >>>>>>> Running setup.py install for py >>>>>>> >>>>>>> Successfully installed pytest py >>>>>>> Cleaning up... >>>>>>> >>>>>>> then I tried to test wether pytest is installed correctly. >>>>>>> >>>>>>> abc@abc-VirtualBox:~$ py.test --version >>>>>>> bash: /usr/bin/py.test: No such file or directory >>>>>>> >>>>>>> What should I do? Hoping for your reply. >>>>>>> >>>>>>> ------------------ 原始邮件 ------------------ >>>>>>> 发件人: "付亚静";<[email protected]>; >>>>>>> 发送时间: 2015年9月9日(星期三) 中午11:08 >>>>>>> 收件人: "付亚静"<[email protected]>; >>>>>>> 主题: 回复： 回复： How to update the newest NuPIC version >>>>>>> >>>>>>> I used "sudo pip install numpy --upgrage" and numpy 1.9.2 was >>>>>>> installed >>>>>>> successfully. >>>>>>> Then I inputed commands: >>>>>>> python setup.py build >>>>>>> python setup.py install --user >>>>>>> python setup.py develop --user >>>>>>> The three commands showed above were all correct. >>>>>>> Then I tried to test it. >>>>>>> $NUPIC/bin/py_region_test >>>>>>> --- ALL TESTS PASSED --- >>>>>>> >>>>>>> But all of the rest tests have the same error. >>>>>>> abc@abc-VirtualBox:~$ $NUPIC/scripts/run_nupic_tests --all --coverage >>>>>>> Traceback (most recent call last): >>>>>>> File "/newdisk/nupic/scripts/run_nupic_tests", line 265, in >>>>>>> <module> >>>>>>> result = main(parser, sys.argv[1:]) >>>>>>> File "/newdisk/nupic/scripts/run_nupic_tests", line 255, in main >>>>>>> exitStatus = call(["py.test"] + args + list(tests)) >>>>>>> File "/usr/lib/python2.7/subprocess.py", line 493, in call >>>>>>> return Popen(*popenargs, **kwargs).wait() >>>>>>> File "/usr/lib/python2.7/subprocess.py", line 679, in __init__ >>>>>>> errread, errwrite) >>>>>>> File "/usr/lib/python2.7/subprocess.py", line 1249, in >>>>>>> _execute_child >>>>>>> raise child_exception >>>>>>> OSError: [Errno 2] No such file or directory >>>>>>> >>>>>>> my pytest version is 2.5.1. >>>>>>> >>>>>>> What should I do next? Thank you. >>>>>>> >>>>>>> >>>>>>> ------------------ 原始邮件 ------------------ >>>>>>> 发件人: "Matthew Taylor";<[email protected]>; >>>>>>> 发送时间: 2015年9月8日(星期二) 晚上11:02 >>>>>>> 收件人: "付亚静"<[email protected]>; >>>>>>> 主题: Re: 回复： How to update the newest NuPIC version >>>>>>> >>>>>>> See >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> https://github.com/numenta/nupic/wiki/Build-and-Installation-FAQ#missing-pythonh-file >>>>>>> >>>>>>> Sent from my MegaPhone >>>>>>> >>>>>>> On Sep 8, 2015, at 5:14 AM, 付亚静 <[email protected]> wrote: >>>>>>> >>>>>>> I tried "git pull" and my local files are the newest. But the code >>>>>>> can't >>>>>>> run. So I input command "python setup.py install --user" and get an >>>>>>> error >>>>>>> as >>>>>>> follows. >>>>>>> ... >>>>>>> File >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> "/tmp/easy_install-C80eUH/numpy-1.9.2/numpy/distutils/command/build_src.py", >>>>>>> line 329, in build_extension_sources >>>>>>> File >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> "/tmp/easy_install-C80eUH/numpy-1.9.2/numpy/distutils/command/build_src.py", >>>>>>> line 386, in generate_sources >>>>>>> File "numpy/core/setup.py", line 432, in generate_config_h >>>>>>> >>>>>>> File "numpy/core/setup.py", line 42, in check_types >>>>>>> >>>>>>> File "numpy/core/setup.py", line 293, in check_types >>>>>>> >>>>>>> SystemError: Cannot compile 'Python.h'. Perhaps you need to install >>>>>>> python-dev|python-devel. >>>>>>> >>>>>>> then I tried: >>>>>>> abc@abc-VirtualBox:/newdisk/nupic$ sudo apt-get install python-dev >>>>>>> Reading package lists... Done >>>>>>> Building dependency tree >>>>>>> Reading state information... Done >>>>>>> python-dev is already the newest version. >>>>>>> 0 upgraded, 0 newly installed, 0 to remove and 195 not upgraded. >>>>>>> >>>>>>> But it still has the same error. >>>>>>> >>>>>>> My OS is ubuntu 12.04, and I just want to update it. Should I just >>>>>>> follow >>>>>>> the commands of "installation" part >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> (https://github.com/numenta/nupic/wiki/Installing-and-Building-NuPIC#installation)? >>>>>>> >>>>>>> >>>>>>> ------------------ 原始邮件 ------------------ >>>>>>> 发件人: "Richard Crowder";<[email protected]>; >>>>>>> 发送时间: 2015年9月8日(星期二) 下午5:39 >>>>>>> 收件人: "付亚静"<[email protected]>; >>>>>>> 主题: Re: How to update the newest NuPIC version >>>>>>> >>>>>>> Hi, >>>>>>> >>>>>>> The usual route is via 'pip install nupic' (local or system wide). In >>>>>>> you >>>>>>> case, grabbing source from GitHub, could you try a 'git pull' to sync >>>>>>> with >>>>>>> the main repository (and then follow the Readme and Wiki steps for >>>>>>> building >>>>>>> and install). >>>>>>> >>>>>>> Regards, Richard. >>>>>>> >>>>>>> >>>>>>> On Tue, Sep 8, 2015 at 10:31 AM, 付亚静 <[email protected]> wrote: >>>>>>>> >>>>>>>> Hi NuPIC: >>>>>>>> I installed the NuPIC environment several monthes ago. And I >>>>>>>> wanted >>>>>>>> to update to the newest version. But I'm not familiar with git >>>>>>>> command. >>>>>>>> I >>>>>>>> tried to use the commands as follows. >>>>>>>> >>>>>>>> abc@abc-VirtualBox:/newdisk/nupic>Git stash >>>>>>>> abc@abc-VirtualBox:/newdisk/nupic>Git fetch origin >>>>>>>> abc@abc-VirtualBox:/newdisk/nupic>Git diff master origin/master >>>>>>>> abc@abc-VirtualBox:/newdisk/nupic>Git stash pop >>>>>>>> >>>>>>>> The file nupic/VERSION shows it is version 0.3.0.dev0, but I find >>>>>>>> some >>>>>>>> files are still not same as the newest file in >>>>>>>> https://github.com/numenta/nupic. >>>>>>>> For example, the files in /nupic/examples/network are not the same. >>>>>>>> >>>>>>>> Maybe it's not your duty to answer this kind of questions. But I >>>>>>>> really >>>>>>>> don't know who can help me to solve it. So hoping for your reply. >>>>>>>> Thank >>>>>>>> you >>>>>>>> so much. >>>>>>>> >>>>>>>> Yajingfu >>>>>>> >>>>>>> >>>>>>
