2012/3/30 Peter Tuhársky <[email protected]> > Hi, Arnaud >
Hi Peter Thank You for Your kind answer. > > I attempted to use USB, as You suggested. After connecting the cable, > kernel detects HP R 5000 as HID like this: > > [ 1701.100025] usb 2-1: new full speed USB device using ohci_hcd and > address 2 > [ 1701.324982] usb 2-1: New USB device found, idVendor=03f0, idProduct=1fe7 > [ 1701.324985] usb 2-1: New USB device strings: Mfr=1, Product=2, > SerialNumber=4 > [ 1701.324989] usb 2-1: Product: HP R5000 > [ 1701.324991] usb 2-1: Manufacturer: HP > [ 1701.324992] usb 2-1: SerialNumber: 3C81520083 > [ 1701.325147] usb 2-1: configuration #1 chosen from 1 choice > [ 1701.391326] usbcore: registered new interface driver hiddev > [ 1701.433359] generic-usb: probe of 0003:03F0:1FE7.0001 failed with error > -22 > [ 1701.433395] usbcore: registered new interface driver usbhid > [ 1701.433460] usbhid: v2.6:USB HID core driver > > Although generic-usb fails with error -22, I hope this should not be a > problem, since next lines, usbcore and usbhid show no no sign of trouble. > not sure why you get this. I'll have to go back to the kernel soon... > I set ups.conf like this: > > protocol = usbhid-ups > port = auto > > However, starting upsdrvctl shows this error: > > Network UPS Tools - UPS driver controller 2.4.3 > Network UPS Tools - Generic HID driver 0.34 (2.4.3) > USB communication driver 0.31 > No matching HID UPS found > Driver failed to start (exit status=1) > > > Should I use some exact vendor specification in ups.conf and if, what > should it be? Or is there other source of trouble? > R5000 (USB productID 0x1fe7) is part of my (still underway) patch :-/ adding "productid=0x1fe7" to your usp.conf will indeed fix it. note that I've still a few fixes staging and tests needed on my side, even for HID. so expect to see a few buggy values, like for battery.temperature. cheers, Arnaud
_______________________________________________ Nut-upsdev mailing list [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsdev
