Hi, Charles
I'm trying compilation but there is no configure command in the cloned
git directory of nut.
Dňa 08.10.2017 o 23:47 Charles Lepple napísal(a):
On Oct 8, 2017, at 4:34 PM, [email protected] wrote:
Thank You for You reply, Charles
Dňa 07.10.2017 o 14:30 Charles Lepple napísal(a):
Is the "lan4.1" cable different from this one?
http://networkupstools.org/cables.html#_tripp_lite
Yes, it is different. The correct cable for this interface version looks like
this:
http://pinouts.ru/UPS/tripplite_smartpro_cable_pinout.shtml
Thanks, I just created an issue to remind me about that later:
https://github.com/networkupstools/nut/issues/487
Are you comfortable with rebuilding the drivers?
I think the best thing might be to see if your UPS responds to the same
protocol query command that is used in tripplite_usb:
Seems that it could help tripplite tree as such... Charles, well, I'm not a
programmer, but if You send me instructions and/or howto, I'll try my best.
I have Debian 9 so please decide, whether it would suffice to use the distributional
source packages or whether build from "raw" upstream source, and instruct me
accordingly.
You might want to rebuild the .deb packages later, but for now, the quickest
way is probably from source.
1) make sure you have "deb-src" lines to match the "deb" lines in
/etc/apt/sources
2) run "sudo apt-get update" if you had to change anything
3) run "sudo apt-get build-dep nut"
3.5) optional: remove "asciidoc" (or install the build-deps manually, and omit
asciidoc) to save a bit of build time
4) run "sudo apt-get -y install git" if you do not already have Git installed
5) clone the source to your working directory: "git clone
https://github.com/networkupstools/nut.git";
6) "cd nut" and run this mega-command:
./configure --includedir=/usr/include --mandir=/usr/share/man \
--infodir=/usr/share/info --sysconfdir=/etc/nut --localstatedir=/var \
--libexecdir=/usr/lib/nut --srcdir=. --enable-maintainer-mode \
--disable-silent-rules --libdir=/usr/lib/x86_64-linux-gnu \
--with-ssl --with-nss --with-cgi --with-dev --enable-static \
--with-statepath=/var/run/nut --with-altpidpath=/var/run/nut \
--with-drvpath=/lib/nut --with-cgipath=/usr/lib/cgi-bin/nut \
--with-htmlpath=/usr/share/nut/www --with-pidpath=/var/run/nut \
--datadir=/usr/share/nut
--with-pkgconfig-dir=/usr/lib/x86_64-linux-gnu/pkgconfig \
--with-user=nut --with-group=nut --with-udev-dir=/lib/udev \
--with-systemdsystemunitdir=/lib/systemd/system
7) run "make"
Hopefully that works, and in the mean time, I will work on a quick patch that
will attempt to grab the protocol number.
_______________________________________________
Nut-upsdev mailing list
[email protected]
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsdev
