Set with upsrw: ups.delay.shutdown=60 is the same as offdelay = 30. This time was done correctly by UPS.
Set with upsrw: ups.delay.start=90 is the same as ondelay = 40. The UPS shut down and reset and forget about the settings. If I use the program in Win 10 settings in the program from Eaton are stable!? Jan. > -----Original Message----- > From: Nut-upsuser <nut-upsuser-bounces+icingaj=gmail.com@alioth- > lists.debian.net> On Behalf Of Roger Price > Sent: Tuesday, July 3, 2018 4:05 PM > To: nut-upsuser Mailing List <[email protected]> > Subject: Re: [Nut-upsuser] No run cmd /usbhid-ups -k ! > > On Tue, 3 Jul 2018, [email protected] wrote: > > > UPS is Eaton 5SC 500i. > > Please do not know how to write some parameters permanently to UPS? > > Read man ups.conf and man usbhid-ups and try setting the required values > in ups.conf. For example > > [Eaton] > driver = usbhid-ups > port = auto > desc = "Eaton 5sc 500i" > offdelay = 30 > ondelay = 40 > lowbatt = 37 > > Roger > > _______________________________________________ > Nut-upsuser mailing list > [email protected] > https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser _______________________________________________ Nut-upsuser mailing list [email protected] https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser
