On Dec 2, 2018, at 3:21 PM, Manuel Wolfshant <[email protected]> wrote:
> 
> On December 2, 2018 7:29:38 PM GMT+02:00, raul <[email protected]> wrote:
>> I have restored original configuration and enabled the ignorelb flag. I
>> 
>> didn't point out in the original e-mail that after every poweroff the 
>> battery percentage is reported at 40% instead of 100% and charges 
>> slowly again to 100%. Maybe the UPS sends a LB event and shuts down 
>> immediatly as suggested in the manual. But the UPS powered off again.
>> The variables reported by upsc can be found here: 
>> https://pastebin.com/JWmnp8iW
>> Graphs plotting the battery charge can be found here: 
>> https://screenshots.firefox.com/iyTY8fAIB2MjXMV5/openmediavault.local
>> The battery charge drops suddenly when the UPS shuts down. 
> 
> Maybe I am completely wrong but this behaviour rhymes quite well with a 
> faulty (old) battery which reports being charged but actually cannot really 
> hold the charge. I suggest taking it off and verifying it with a voltmeter , 
> preferably while having a consumer connected as well ( like a good old 12V 
> incandescent light bulb, as those used for cars i.e. 25-45W or so )

Agreed - my previous emails were assuming that the battery can hold a charge, 
and pass a self-test. If the UPS performs a self-test, and the battery voltage 
drops below the UPS low-battery threshold before the microcontroller can cancel 
the test, it will look like an uncontrolled shutdown. "ignorelb" cannot prevent 
this.

A little more explanation on "ignorelb": it prevents NUT from trusting the LB 
flag that the UPS sends. This is really meant for simple UPSes which do not 
allow adjustment of the LB threshold (almost all MGE/Eaton models do; see the 
"battery.charge.low" setting in "upsrw"). NUT still needs to determine some 
threshold for shutdown, and this is typically provided in ups.conf with some 
"override.*" settings. See https://networkupstools.org/docs/man/ups.conf.html 
for more details.
_______________________________________________
Nut-upsuser mailing list
[email protected]
https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser

Reply via email to