On Tue, 7 Jan 2020, Gene Heskett wrote:
● nut-monitor.service - Network UPS Tools - power device monitor and
shutdown controller
Loaded: loaded (/lib/systemd/system/nut-monitor.service; enabled;
vendor preset: enabled)
Active: failed (Result: protocol) since Tue 2020-01-07 07:19:19 EST;
116ms ago
Process: 32343 ExecStart=/sbin/upsmon (code=exited, status=0/SUCCESS)
Jan 07 07:19:19 rpi4 systemd[1]: Starting Network UPS Tools - power
device monitor and shutdown controller...
Jan 07 07:19:19 rpi4 upsmon[32343]: upsmon disabled, please adjust the
configuration to your needs
Jan 07 07:19:19 rpi4 upsmon[32343]: Then set MODE to a suitable value
in /etc/nut/nut.conf to enable it
So, is there enough help in the man pages?, or do you see any
showstoppers in the above trace?
The configuration file nut.conf is supplied with the declaration MODE=none which
is a built-in showstopper. The user is expected to change this to show that NUT
has been configured. There are more details in man nut.conf.
Roger
_______________________________________________
Nut-upsuser mailing list
[email protected]
https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser
