On Thursday 09 January 2020 17:51:01 Gene Heskett wrote: > On Thursday 09 January 2020 16:59:12 Charles Lepple wrote: > > On Jan 9, 2020, at 4:39 PM, Gene Heskett <[email protected]> wrote: > > > So for starters, what's the best ./configure command line? > > > > There’s this page for matching the layout of an existing Debian > > install: > > https://github.com/networkupstools/nut/wiki/Building-NUT-on-Debian,- > >Ra spbian-and-Ubuntu > > > > But remind me, what are you hoping to get from the later version of > > NUT? (We don’t have code for Modbus yet, per my other email about > > the two varieties of Smart-UPS 1500.) > > Experience building it? Since it won't actually be doing any shutdown > type control, I figure once built and installed, I can copy this > machines /etc/ups contents over what is going to be installed and be > not more than one edit away from running a "upsc myups" and getting a > report from it. Or am I dreaming? > > I do note that this ups has 3 rj45's on the end of it, but all my > ethernet in that box is committed. I'd assume 2 of them are for surge > absorption loop-thru's, but none of the 3 are actually labeled, so > I've no clue which is which w/o reading what little docs came with it. > Shrug. :) > > Down to the mega-command, I left out the ssl and NSS, had to install > libusb-dev but I see its not going to make docs. That needs fixed as > most of that stuff is already installed. But adding --with-doc opens > another can of worms: > > A "make" says it needs aclocal, which is part of automake, but its > newer than what it wants, which is aclocal-1.14, but I have automake > 1:1.16.1-4. > > Suggested fix? > > Thanks Roger & Charles. > > Cheers, Gene Heskett
The "make" showstopper above is valid with or without --with-doc in the ./configure line. Will it barf with the newer autoconf/automake? reran autoconf and automake, no go, finally edited the Makefile to use what I had, then it made and installed. Fiddled with chown and finally got this configs /etc/nut stuff copied to the pi, and its running but the cable is unplugged. I need to go check a drawer in the lathe for a part another sheldon owner needs so I'll plug in the cable while out there. BRB. Works: pi@rpi4:/media/pi/workspace/nut-2.7.4/etc-nut-from-coyote/nut $ upsc myups Init SSL without certificate database battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 20 battery.mfr.date: CPS battery.runtime: 7650 battery.runtime.low: 300 battery.type: PbAcid battery.voltage: 14.5 battery.voltage.nominal: 12 device.mfr: CPS device.model: CP625HGa device.type: ups driver.name: usbhid-ups driver.parameter.offdelay: 120 driver.parameter.ondelay: 0 driver.parameter.pollfreq: 30 driver.parameter.pollinterval: 2 driver.parameter.port: auto driver.parameter.synchronous: no driver.version: 2.7.4 driver.version.data: CyberPower HID 0.4 driver.version.internal: 0.41 input.transfer.high: 0 input.transfer.low: 0 input.voltage: 120.0 input.voltage.nominal: 120 output.voltage: 120.0 ups.beeper.status: enabled ups.delay.shutdown: 120 ups.delay.start: 0 ups.load: 0 ups.mfr: CPS ups.model: CP625HGa ups.productid: 0501 ups.realpower.nominal: 375 ups.status: OL ups.test.result: No test initiated ups.timer.shutdown: -60 ups.timer.start: 0 ups.vendorid: 0764 Now all I have to do is feed it to the pi's psu. Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) If we desire respect for the law, we must first make the law respectable. - Louis D. Brandeis Genes Web page <http://geneslinuxbox.net:6309/gene> _______________________________________________ Nut-upsuser mailing list [email protected] https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser
