On Fri, Sep 11, 2020 at 11:06 PM Bartosz <[email protected]> wrote: > > Dear All, > > Could you please recommend me a UPS with 100% support of the ondelay > parameter and NUT compatibility? > > 850 or 1000 VA > > I have the EATON 5E850iUSBDIN UPS and it does not support this parameter so I > would like to buy another UPS that for sure will support it. > > Thank you, > Bart
Hi, I'd also be interested in hearing other people's experiences regarding this. It would be even better if there'd be the option to power on only when the battery has been charged to 50% for instance, but I'm guessing this option is reserved for professional UPSes in the 1k or higher price range, so I'm not holding my breath. Currently, I'm running a Legrand KEOR SP 600 which has the OnDelay option in its software and it seems to work as advertised (I remember testing witn OnDelay = 60 sec and it worked). The issue is that their software (UPS communicator v1.34 [1]) is quite old, so I was only able to get it to run on an old 32bit Debian7 VM. Yup, in 2020, the software controlling the UPS only runs on 32bit OSes. So the UPS is controlled by this VM (which I've configured with USB passthrough) and, when the power goes out, a script on the VM SSHes into the other devices in the network and shuts them down. Quite the convoluted setup... Unfortunately, I did not have time to test the UPS with NUT. Maybe sometime in the future. [1] https://ups.legrand.com/en/software/software-download Regards, Gabriel _______________________________________________ Nut-upsuser mailing list [email protected] https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser
