Thank you Roger for the information. You are right, I bought the Eaton Eco 1600 2 months ago and the ondelay type of feature was not listed nor supported so I had to return the UPS back to the store.
Best Regards, Bart sob., 12 wrz 2020, 17:00 użytkownik Roger Price <[email protected]> napisał: > On Fri, 11 Sep 2020, Bartosz wrote: > > > Could you please recommend me a UPS with 100% support of the ondelay > parameter > > and NUT compatibility? 850 or 1000 VA I have the EATON 5E850iUSBDIN UPS > and it > > does not support this parameter so I would like to buy another UPS that > for > > sure will support it. > > I have an Eaton Ellipse Eco 1600 bought in 2016 which has a delayed start > feature. If wall power returns quickly, the UPS will wait this time to > restart > the outlets. But now that manufacturers seem to be silently removing this > feature from their UPS's I don't know if the current versions support > ups.delay.start > > On Fri, 11 Sep 2020, Dan Langille wrote: > > > Can you tell from this output? If not, what should I be looking for to > answer > > your question? > > If I understand the question correctly: > > > ups.delay.shutdown: 20 > > ups.delay.start: 30 > > Perhaps these commands also do something similar, but my Ellipse 1600 does > not > have them: > > > outlet.1.delay.shutdown: 65535 > > outlet.1.delay.start: 3 > > Roger > > _______________________________________________ > Nut-upsuser mailing list > [email protected] > https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser
_______________________________________________ Nut-upsuser mailing list [email protected] https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser
