On Fri, Dec 20, 2024 at 7:33 PM Mario Wolczko <[email protected]> wrote: > > Today I installed NUT on a RPi via the Home Assistant add-on (HA running on > HAssOS), to manage a Liebert Vertiv PSA5. I used the latest version of > everything. > > At first I got these messages in the log: > > Bus 001 Device 005: ID 10af:0002 Liebert Corp. PowerSure PST UPS > … > [13:17:32] INFO: Starting the UPS drivers... > This Liebert device (10af:0002) is not (or perhaps not yet) supported > by usbhid-ups. Please make sure you have an up-to-date version of NUT. If > this does not fix the problem, try running the driver with the > '-x productid=0002' option. Please report your results to the NUT user's > mailing list <[email protected]>. > > After adding the recommended option to the config, NUT ran, but the entities > presented via the HA NUT integration are, well, disappointing: > > The second appears somewhat redundant, and, assuming I’m interpreting the > first correctly, it is wrong: the UPS is on line power. > Is this to be expected? > > Thanks, > Mario > > Add-on version: 0.14.0 > You are running the latest version of this add-on. > System: Home Assistant OS 14.1 (aarch64 / raspberrypi4-64) > Home Assistant Core: 2024.12.1 > Home Assistant Supervisor: 2024.12.0 > > Network UPS Tools upsd 2.8.0 > Network UPS Tools upsmon 2.8.0 > > Network UPS Tools - Generic HID driver 0.47 (2.8.0) > USB communication driver (libusb 1.0) 0.43 > Using subdriver: Belkin/Liebert HID 0.18 > Network UPS Tools - UPS driver controller 2.8.0 >
https://github.com/networkupstools/nut/pull/2629 _______________________________________________ Nut-upsuser mailing list [email protected] https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser
