Hi Peter
Thanks for responding.
Running newhidups -DD -u root -x generic -x vendorid=0925 auto produces
Network UPS Tools: New USB/HID UPS driver 0.28 (2.0.3)
Fatal error: 'generic' is not a valid flag for this driver.
However, newhidups -DD -u root -x vendorid=0925 auto
Network UPS Tools: New USB/HID UPS driver 0.28 (2.0.3)
debug level is '2'
Checking device (046D/C20D) (003/004)
- VendorID: 046d
- ProductID: c20d
- Manufacturer: Logitech
- Product: WingMan Attack 2
- Serial Number: unknown
- Bus: 003
Trying to match device
Device does not match - skipping
Checking device (05A9/0518) (003/002)
- VendorID: 05a9
- ProductID: 0518
- Manufacturer: OmniVision Technologies, Inc.
- Product: USB Camera
- Serial Number: unknown
- Bus: 003
Trying to match device
Device does not match - skipping
Checking device (0451/2046) (003/003)
- VendorID: 0451
- ProductID: 2046
- Manufacturer: unknown
- Product: unknown
- Serial Number: unknown
- Bus: 003
Trying to match device
Device does not match - skipping
Checking device (0925/1234) (002/002)
- VendorID: 0925
- ProductID: 1234
- Manufacturer: Richcomm Tech
- Product: UPS2004
- Serial Number: unknown
- Bus: 002
Trying to match device
Device does not match - skipping
Checking device (0000/0000) (002/001)
- VendorID: 0000
- ProductID: 0000
- Manufacturer: Linux 2.6.16-1.2133_FC5smp uhci_hcd
- Product: UHCI Host Controller
- Serial Number: 0000:00:1d.0
- Bus: 002
Trying to match device
Device does not match - skipping
Checking device (0000/0000) (005/001)
- VendorID: 0000
- ProductID: 0000
- Manufacturer: Linux 2.6.16-1.2133_FC5smp uhci_hcd
- Product: UHCI Host Controller
- Serial Number: 0000:00:1d.3
- Bus: 005
Trying to match device
Device does not match - skipping
Checking device (0000/0000) (004/001)
- VendorID: 0000
- ProductID: 0000
- Manufacturer: Linux 2.6.16-1.2133_FC5smp uhci_hcd
- Product: UHCI Host Controller
- Serial Number: 0000:00:1d.2
- Bus: 004
Trying to match device
Device does not match - skipping
Checking device (0000/0000) (001/001)
- VendorID: 0000
- ProductID: 0000
- Manufacturer: Linux 2.6.16-1.2133_FC5smp ehci_hcd
- Product: EHCI Host Controller
- Serial Number: 0000:00:1d.7
- Bus: 001
Trying to match device
Device does not match - skipping
No appropriate HID device found
No matching USB/HID UPS found
I really appreciate this effort.
Eli
Eli,
Gamatronic is not currently supported by the newhidups driver. You
have two options:
(1) look at the file data/driver.list or
http://www.networkupstools.org/compat/ to find a serial driver
that matches your device, and/or
(2) post the output of
newhidups -DD -u root -x generic -x vendorid=0925 auto
and we'll try to see if any USB driver can be modified to support
this device.
-- Peter
Eli Wapniarski wrote:
Hi
I am running FC5 with nut coming from the fc5 extras repositories. I =20
am trying to configure a Gamatronic D-Compact ups. The cable that came =20
with the ups has a serial connector on one end and a usb on the other.
cat /proc/bus/usb/devices produces
T: Bus=3D01 Lev=3D01 Prnt=3D01 Port=3D01 Cnt=3D01 Dev#=3D 4
Spd=3D1.5 MxCh=
=3D 0
D: Ver=3D 1.10 Cls=3D00(>ifc ) Sub=3D00 Prot=3D00 MxPS=3D 8 #Cfgs=3D 1
P: Vendor=3D0925 ProdID=3D1234 Rev=3D 0.01
S: Manufacturer=3DRichcomm Tech
S: Product=3DUPS2004
C:* #Ifs=3D 1 Cfg#=3D 1 Atr=3D80 MxPwr=3D100mA
I: If#=3D 0 Alt=3D 0 #EPs=3D 1 Cls=3D03(HID ) Sub=3D00 Prot=3D00
Driver=3D=
usbhid
E: Ad=3D81(I) Atr=3D03(Int.) MxPS=3D 6 Ivl=3D10ms
So the ups is detected. But when I try to run
upsdrvctl -u nut start or upsdrvctl -u root start I get
Network UPS Tools - UPS driver controller 2.0.3
execv: Permission denied
Driver failed to start (exit status=3D1)
/etc/rc.d/init.d/ups start produces
Starting newhidups: Network UPS Tools: New USB/HID UPS driver 0.28 (2.0.3)
No matching USB/HID UPS found
[FAILED]
Starting upsd: Network UPS Tools upsd 2.0.3
Can't connect to UPS [Gamatronic] (-auto): No such file or directory
Synchronizing........ giving up
[ OK ]
Starting UPS monitor (master): Network UPS Tools upsmon 2.0.3
Using power down flag file /etc/killpower
Fatal error: insufficient power configured!
Sum of power values........: 0
Minimum value (MINSUPPLIES): 1
Edit your upsmon.conf and change the values.
[FAILED]
/etc/sysconfig/ups contains
# If the UPS is locally attached set it to "yes"
SERVER=3Dyes
# Model of the UPS (filename to call for it, without path)
# Example - one of
# apcsmart - APC SMartUPS and similar
# fentonups - Fenton UPS
# optiups
# bestups
# genericups
# ups-trust425+625
# upsdrvctl
# You MUST change this, or set SERVER to "no"
# To support multiple drivers, set MODEL=3Dupsdrvctl
MODEL=3Dnewhidups
# UPS device - needed if UPS is locally attached
DEVICE=3Dauto
# Any options to pass to $MODEL
# ex. for my TrippLite UPS, use
# OPTIONS=3D"-t 5"
OPTIONS=3D
# Any options to pass to upsd
UPSD_OPTIONS=3D
#
# [End]
/etc/ups/ups.conf contains
[Gamatronic]
driver=3D newhidups
port =3D auto
desc =3D "Gamatronic D-Compact"
I tried to modifying /etc/udev/rules.d/nut-usbups.rules to inlcude the =20
following lines before LABEL=3D"nut-usbups_rules_end" to include
# Gamatronic D-Compact - usbhid-ups
SYSFS{idVendor}=3D=3D"0925", SYSFS{idProduct}=3D=3D"1234",
MODE=3D"660", GRO=
UP=3D"nut"
I got the same results. Please help me to get nut configured correctly.
Thanks
Eli
_______________________________________________
Nut-upsuser mailing list
[email protected]
http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
_______________________________________________
Nut-upsuser mailing list
[email protected]
http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
