Hi Eli, sorry, I forgot to say: you should first get and compile the newest development tree of NUT from the SVN repository. The -x generic flag will not work with 2.0.3. See http://www.networkupstools.org/source.html
-- Peter Eli Wapniarski wrote: > > Hi Peter > > Thanks for responding. > Running newhidups -DD -u root -x generic -x vendorid=3D0925 auto produces > > Network UPS Tools: New USB/HID UPS driver 0.28 (2.0.3) > Fatal error: 'generic' is not a valid flag for this driver. > > However, newhidups -DD -u root -x vendorid=3D0925 auto > > Network UPS Tools: New USB/HID UPS driver 0.28 (2.0.3) > > debug level is '2' > Checking device (046D/C20D) (003/004) > - VendorID: 046d > - ProductID: c20d > - Manufacturer: Logitech > - Product: WingMan Attack 2 > - Serial Number: unknown > - Bus: 003 > Trying to match device > Device does not match - skipping > Checking device (05A9/0518) (003/002) > - VendorID: 05a9 > - ProductID: 0518 > - Manufacturer: OmniVision Technologies, Inc. > - Product: USB Camera > - Serial Number: unknown > - Bus: 003 > Trying to match device > Device does not match - skipping > Checking device (0451/2046) (003/003) > - VendorID: 0451 > - ProductID: 2046 > - Manufacturer: unknown > - Product: unknown > - Serial Number: unknown > - Bus: 003 > Trying to match device > Device does not match - skipping > Checking device (0925/1234) (002/002) > - VendorID: 0925 > - ProductID: 1234 > - Manufacturer: Richcomm Tech > - Product: UPS2004 > - Serial Number: unknown > - Bus: 002 > Trying to match device > Device does not match - skipping > Checking device (0000/0000) (002/001) > - VendorID: 0000 > - ProductID: 0000 > - Manufacturer: Linux 2.6.16-1.2133_FC5smp uhci_hcd > - Product: UHCI Host Controller > - Serial Number: 0000:00:1d.0 > - Bus: 002 > Trying to match device > Device does not match - skipping > Checking device (0000/0000) (005/001) > - VendorID: 0000 > - ProductID: 0000 > - Manufacturer: Linux 2.6.16-1.2133_FC5smp uhci_hcd > - Product: UHCI Host Controller > - Serial Number: 0000:00:1d.3 > - Bus: 005 > Trying to match device > Device does not match - skipping > Checking device (0000/0000) (004/001) > - VendorID: 0000 > - ProductID: 0000 > - Manufacturer: Linux 2.6.16-1.2133_FC5smp uhci_hcd > - Product: UHCI Host Controller > - Serial Number: 0000:00:1d.2 > - Bus: 004 > Trying to match device > Device does not match - skipping > Checking device (0000/0000) (001/001) > - VendorID: 0000 > - ProductID: 0000 > - Manufacturer: Linux 2.6.16-1.2133_FC5smp ehci_hcd > - Product: EHCI Host Controller > - Serial Number: 0000:00:1d.7 > - Bus: 001 > Trying to match device > Device does not match - skipping > No appropriate HID device found > No matching USB/HID UPS found > > I really appreciate this effort. > > Eli > > > Eli, > > > > Gamatronic is not currently supported by the newhidups driver. You > > have two options: > > > > (1) look at the file data/driver.list or > > http://www.networkupstools.org/compat/ to find a serial driver > > that matches your device, and/or > > > > (2) post the output of > > > > newhidups -DD -u root -x generic -x vendorid=3D0925 auto > > > > and we'll try to see if any USB driver can be modified to support > > this device. > > > > -- Peter > > > > Eli Wapniarski wrote: > >> > >> Hi > >> > >> I am running FC5 with nut coming from the fc5 extras repositories. I =3D2= > 0 > >> am trying to configure a Gamatronic D-Compact ups. The cable that came = > =3D20 > >> with the ups has a serial connector on one end and a usb on the other. > >> > >> cat /proc/bus/usb/devices produces > >> > >> T: Bus=3D3D01 Lev=3D3D01 Prnt=3D3D01 Port=3D3D01 Cnt=3D3D01 Dev#=3D3D 4= > =20 > >> Spd=3D3D1.5 MxCh=3D > >> =3D3D 0 > >> D: Ver=3D3D 1.10 Cls=3D3D00(>ifc ) Sub=3D3D00 Prot=3D3D00 MxPS=3D3D 8 #C= > fgs=3D3D 1 > >> P: Vendor=3D3D0925 ProdID=3D3D1234 Rev=3D3D 0.01 > >> S: Manufacturer=3D3DRichcomm Tech > >> S: Product=3D3DUPS2004 > >> C:* #Ifs=3D3D 1 Cfg#=3D3D 1 Atr=3D3D80 MxPwr=3D3D100mA > >> I: If#=3D3D 0 Alt=3D3D 0 #EPs=3D3D 1 Cls=3D3D03(HID ) Sub=3D3D00 Prot= > =3D3D00 =20 > >> Driver=3D3D=3D > >> usbhid > >> E: Ad=3D3D81(I) Atr=3D3D03(Int.) MxPS=3D3D 6 Ivl=3D3D10ms > >> > >> So the ups is detected. But when I try to run > >> > >> upsdrvctl -u nut start or upsdrvctl -u root start I get > >> > >> Network UPS Tools - UPS driver controller 2.0.3 > >> execv: Permission denied > >> Driver failed to start (exit status=3D3D1) > >> > >> > >> /etc/rc.d/init.d/ups start produces > >> > >> Starting newhidups: Network UPS Tools: New USB/HID UPS driver 0.28 (2.0.3= > ) > >> > >> No matching USB/HID UPS found > >> [FAILED] > >> Starting upsd: Network UPS Tools upsd 2.0.3 > >> Can't connect to UPS [Gamatronic] (-auto): No such file or directory > >> Synchronizing........ giving up > >> [ OK ] > >> Starting UPS monitor (master): Network UPS Tools upsmon 2.0.3 > >> Using power down flag file /etc/killpower > >> > >> > >> Fatal error: insufficient power configured! > >> > >> Sum of power values........: 0 > >> Minimum value (MINSUPPLIES): 1 > >> > >> Edit your upsmon.conf and change the values. > >> [FAILED] > >> > >> /etc/sysconfig/ups contains > >> > >> # If the UPS is locally attached set it to "yes" > >> SERVER=3D3Dyes > >> # Model of the UPS (filename to call for it, without path) > >> # Example - one of > >> # apcsmart - APC SMartUPS and similar > >> # fentonups - Fenton UPS > >> # optiups > >> # bestups > >> # genericups > >> # ups-trust425+625 > >> # upsdrvctl > >> # You MUST change this, or set SERVER to "no" > >> # To support multiple drivers, set MODEL=3D3Dupsdrvctl > >> MODEL=3D3Dnewhidups > >> # UPS device - needed if UPS is locally attached > >> DEVICE=3D3Dauto > >> # Any options to pass to $MODEL > >> # ex. for my TrippLite UPS, use > >> # OPTIONS=3D3D"-t 5" > >> OPTIONS=3D3D > >> # Any options to pass to upsd > >> UPSD_OPTIONS=3D3D > >> # > >> # [End] > >> > >> /etc/ups/ups.conf contains > >> > >> [Gamatronic] > >> driver=3D3D newhidups > >> port =3D3D auto > >> desc =3D3D "Gamatronic D-Compact" > >> > >> > >> I tried to modifying /etc/udev/rules.d/nut-usbups.rules to inlcude the = > =3D20 > >> following lines before LABEL=3D3D"nut-usbups_rules_end" to include > >> > >> # Gamatronic D-Compact - usbhid-ups > >> SYSFS{idVendor}=3D3D=3D3D"0925", SYSFS{idProduct}=3D3D=3D3D"1234", =20 > >> MODE=3D3D"660", GRO=3D > >> UP=3D3D"nut" > >> > >> I got the same results. Please help me to get nut configured correctly. > >> > >> Thanks > >> > >> Eli > >> > >> _______________________________________________ > >> Nut-upsuser mailing list > >> [email protected] > >> http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser > >> > > > > > > _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
