Interesting. This device is definitely not currently supported. However, I have seen this type of device before, on a Kebo UPS-650D. See the posts of Andrew Dancy on the Nut-upsdev mailing list, September 26-27, 2005.
It is probably not a USB HID device, but some proprietary serial-over-USB protocol. At the time, Andrew Dancy decided that his device was too cheap and too outdated to be worth investigating. You *could* try the patch that I sent on September 27 on nut-upsdev, and see if you get any mileage out of it. It would only be a first step towards deciphering this device, though. -- Peter Eli Wapniarski wrote: > > OK Peter > > Here goes. I uninstalled the 2.03 and then compiled and installed using the > following > > ./configure --prefix=/usr --with-user=nut > make > make usb > make install > make install-usb > > One funny thing to note. when I run the command newhidups, without specifying > the location /usr/bin, for some reason I get the error > > -bash: /sbin/newhidups: No such file or directory > > weird. /usr/bin is in my path. Anyway... right now no big deal. Here is the > output as requeted. > > /usr/bin/newhidups -DD -u root -x generic -x vendorid=0925 auto > Network UPS Tools: New USB/HID UPS driver 0.28 (2.1.0) > > debug level is '2' > Checking device (046D/C20D) (003/004) > - VendorID: 046d > - ProductID: c20d > - Manufacturer: Logitech > - Product: WingMan Attack 2 > - Serial Number: unknown > - Bus: 003 > Trying to match device > Device does not match - skipping > Checking device (05A9/0518) (003/002) > - VendorID: 05a9 > - ProductID: 0518 > - Manufacturer: OmniVision Technologies, Inc. > - Product: USB Camera > - Serial Number: unknown > - Bus: 003 > Trying to match device > Device does not match - skipping > Checking device (0451/2046) (003/003) > - VendorID: 0451 > - ProductID: 2046 > - Manufacturer: unknown > - Product: unknown > - Serial Number: unknown > - Bus: 003 > Trying to match device > Device does not match - skipping > Checking device (0925/1234) (002/002) > - VendorID: 0925 > - ProductID: 1234 > - Manufacturer: Richcomm Tech > - Product: UPS2004 > - Serial Number: unknown > - Bus: 002 > Trying to match device > Device matches > HID descriptor retrieved (Reportlen = 78) > Report descriptor retrieved (Reportlen = 78) > Found HID device > Report Descriptor size = 78 > Detected a UPS: Richcomm Tech /UPS2004 > Using subdriver: GENERIC HID 0.1 > Can't find object ffa00001.ffa00002.ffa10003 > Path: ffa00001.ffa00002.ffa10003, Type: Input > Can't find object ffa00001.ffa00002.ffa10004 > Path: ffa00001.ffa00002.ffa10004, Type: Input > Can't find object ffa00001.ffa00002.ffa10005 > Path: ffa00001.ffa00002.ffa10005, Type: Input > Can't find object ffa00001.ffa00002.ffa10006 > Path: ffa00001.ffa00002.ffa10006, Type: Input > Can't find object ffa00001.ffa00002.ffa10007 > Path: ffa00001.ffa00002.ffa10007, Type: Input > Can't find object ffa00001.ffa00002.ffa10008 > Path: ffa00001.ffa00002.ffa10008, Type: Input > Can't find object ffa00001.ffa00002.ffa10009 > Path: ffa00001.ffa00002.ffa10009, Type: Output > Can't find object ffa00001.ffa00002.ffa1000a > Path: ffa00001.ffa00002.ffa1000a, Type: Output > Can't find object ffa00001.ffa00002.ffa1000b > Path: ffa00001.ffa00002.ffa1000b, Type: Output > Can't find object ffa00001.ffa00002.ffa1000c > Path: ffa00001.ffa00002.ffa1000c, Type: Output > entering identify_ups(0x0925, 0x1234) > > upsdrv_updateinfo... > dstate_init: sock /var/state/ups/newhidups-auto open on fd 5 > upsdrv_updateinfo... > Waiting for notifications... > upsdrv_updateinfo... > Waiting for notifications... > upsdrv_updateinfo... > Waiting for notifications... > > Keeps on repeating the same thing over and over again until I press Control C. > > Eli > > > On Wednesday, 14 =D7=91June 2006 18:52, Peter Selinger wrote: > > Hi Eli, > > > > sorry, I forgot to say: you should first get and compile the newest > > development tree of NUT from the SVN repository. The -x generic flag > > will not work with 2.0.3. See > > http://www.networkupstools.org/source.html > > > > -- Peter > > > > Eli Wapniarski wrote: > > > Hi Peter > > > > > > Thanks for responding. > > > Running newhidups -DD -u root -x generic -x vendorid=0925 auto produces > > > > > > Network UPS Tools: New USB/HID UPS driver 0.28 (2.0.3) > > > Fatal error: 'generic' is not a valid flag for this driver. > > > > > > However, newhidups -DD -u root -x vendorid=0925 auto > > > > > > Network UPS Tools: New USB/HID UPS driver 0.28 (2.0.3) > > > > > > debug level is '2' > > > Checking device (046D/C20D) (003/004) > > > - VendorID: 046d > > > - ProductID: c20d > > > - Manufacturer: Logitech > > > - Product: WingMan Attack 2 > > > - Serial Number: unknown > > > - Bus: 003 > > > Trying to match device > > > Device does not match - skipping > > > Checking device (05A9/0518) (003/002) > > > - VendorID: 05a9 > > > - ProductID: 0518 > > > - Manufacturer: OmniVision Technologies, Inc. > > > - Product: USB Camera > > > - Serial Number: unknown > > > - Bus: 003 > > > Trying to match device > > > Device does not match - skipping > > > Checking device (0451/2046) (003/003) > > > - VendorID: 0451 > > > - ProductID: 2046 > > > - Manufacturer: unknown > > > - Product: unknown > > > - Serial Number: unknown > > > - Bus: 003 > > > Trying to match device > > > Device does not match - skipping > > > Checking device (0925/1234) (002/002) > > > - VendorID: 0925 > > > - ProductID: 1234 > > > - Manufacturer: Richcomm Tech > > > - Product: UPS2004 > > > - Serial Number: unknown > > > - Bus: 002 > > > Trying to match device > > > Device does not match - skipping > > > Checking device (0000/0000) (002/001) > > > - VendorID: 0000 > > > - ProductID: 0000 > > > - Manufacturer: Linux 2.6.16-1.2133_FC5smp uhci_hcd > > > - Product: UHCI Host Controller > > > - Serial Number: 0000:00:1d.0 > > > - Bus: 002 > > > Trying to match device > > > Device does not match - skipping > > > Checking device (0000/0000) (005/001) > > > - VendorID: 0000 > > > - ProductID: 0000 > > > - Manufacturer: Linux 2.6.16-1.2133_FC5smp uhci_hcd > > > - Product: UHCI Host Controller > > > - Serial Number: 0000:00:1d.3 > > > - Bus: 005 > > > Trying to match device > > > Device does not match - skipping > > > Checking device (0000/0000) (004/001) > > > - VendorID: 0000 > > > - ProductID: 0000 > > > - Manufacturer: Linux 2.6.16-1.2133_FC5smp uhci_hcd > > > - Product: UHCI Host Controller > > > - Serial Number: 0000:00:1d.2 > > > - Bus: 004 > > > Trying to match device > > > Device does not match - skipping > > > Checking device (0000/0000) (001/001) > > > - VendorID: 0000 > > > - ProductID: 0000 > > > - Manufacturer: Linux 2.6.16-1.2133_FC5smp ehci_hcd > > > - Product: EHCI Host Controller > > > - Serial Number: 0000:00:1d.7 > > > - Bus: 001 > > > Trying to match device > > > Device does not match - skipping > > > No appropriate HID device found > > > No matching USB/HID UPS found > > > > > > I really appreciate this effort. > > > > > > Eli > > > > > > > Eli, > > > > > > > > Gamatronic is not currently supported by the newhidups driver. You > > > > have two options: > > > > > > > > (1) look at the file data/driver.list or > > > > http://www.networkupstools.org/compat/ to find a serial driver > > > > that matches your device, and/or > > > > > > > > (2) post the output of > > > > > > > > newhidups -DD -u root -x generic -x vendorid=0925 auto > > > > > > > > and we'll try to see if any USB driver can be modified to support > > > > this device. > > > > > > > > -- Peter > > > > > > > > Eli Wapniarski wrote: > > > >> Hi > > > >> > > > >> I am running FC5 with nut coming from the fc5 extras repositories. I > > > >> =2= > > > > > > 0 > > > > > > >> am trying to configure a Gamatronic D-Compact ups. The cable that came > > > >> = > > > > > > =20 > > > > > > >> with the ups has a serial connector on one end and a usb on the other. > > > >> > > > >> cat /proc/bus/usb/devices produces > > > >> > > > >> T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= > > > >> 4= > > > > > > =20 > > > > > > >> Spd=1.5 MxCh= > > > >> = 0 > > > >> D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 > > > >> #C= > > > > > > fgs= 1 > > > > > > >> P: Vendor=0925 ProdID=1234 Rev= 0.01 > > > >> S: Manufacturer=Richcomm Tech > > > >> S: Product=UPS2004 > > > >> C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA > > > >> I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 > > > >> Prot= > > > > > > =00 =20 > > > > > > >> Driver== > > > >> usbhid > > > >> E: Ad=81(I) Atr=03(Int.) MxPS= 6 Ivl=10ms > > > >> > > > >> So the ups is detected. But when I try to run > > > >> > > > >> upsdrvctl -u nut start or upsdrvctl -u root start I get > > > >> > > > >> Network UPS Tools - UPS driver controller 2.0.3 > > > >> execv: Permission denied > > > >> Driver failed to start (exit status=1) > > > >> > > > >> > > > >> /etc/rc.d/init.d/ups start produces > > > >> > > > >> Starting newhidups: Network UPS Tools: New USB/HID UPS driver 0.28 > > > >> (2.0.3= > > > > > > ) > > > > > > >> No matching USB/HID UPS found > > > >> [FAILED] > > > >> Starting upsd: Network UPS Tools upsd 2.0.3 > > > >> Can't connect to UPS [Gamatronic] (-auto): No such file or directory > > > >> Synchronizing........ giving up > > > >> [ OK ] > > > >> Starting UPS monitor (master): Network UPS Tools upsmon 2.0.3 > > > >> Using power down flag file /etc/killpower > > > >> > > > >> > > > >> Fatal error: insufficient power configured! > > > >> > > > >> Sum of power values........: 0 > > > >> Minimum value (MINSUPPLIES): 1 > > > >> > > > >> Edit your upsmon.conf and change the values. > > > >> [FAILED] > > > >> > > > >> /etc/sysconfig/ups contains > > > >> > > > >> # If the UPS is locally attached set it to "yes" > > > >> SERVER=yes > > > >> # Model of the UPS (filename to call for it, without path) > > > >> # Example - one of > > > >> # apcsmart - APC SMartUPS and similar > > > >> # fentonups - Fenton UPS > > > >> # optiups > > > >> # bestups > > > >> # genericups > > > >> # ups-trust425+625 > > > >> # upsdrvctl > > > >> # You MUST change this, or set SERVER to "no" > > > >> # To support multiple drivers, set MODEL=upsdrvctl > > > >> MODEL=newhidups > > > >> # UPS device - needed if UPS is locally attached > > > >> DEVICE=auto > > > >> # Any options to pass to $MODEL > > > >> # ex. for my TrippLite UPS, use > > > >> # OPTIONS="-t 5" > > > >> OPTIONS= > > > >> # Any options to pass to upsd > > > >> UPSD_OPTIONS= > > > >> # > > > >> # [End] > > > >> > > > >> /etc/ups/ups.conf contains > > > >> > > > >> [Gamatronic] > > > >> driver= newhidups > > > >> port = auto > > > >> desc = "Gamatronic D-Compact" > > > >> > > > >> > > > >> I tried to modifying /etc/udev/rules.d/nut-usbups.rules to inlcude the > > > >> = > > > > > > =20 > > > > > > >> following lines before LABEL="nut-usbups_rules_end" to include > > > >> > > > >> # Gamatronic D-Compact - usbhid-ups > > > >> SYSFS{idVendor}=="0925", SYSFS{idProduct}=="1234", > > > >> =20 MODE="660", GRO= > > > >> UP="nut" > > > >> > > > >> I got the same results. Please help me to get nut configured > > > >> correctly. > > > >> > > > >> Thanks > > > >> > > > >> Eli > > > >> > > > >> _______________________________________________ > > > >> Nut-upsuser mailing list > > > >> [email protected] > > > >> http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser > _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
