I have an FC5 system with a powerware 5110 usb ups. The system seems to find the UPS ------------------------------ [EMAIL PROTECTED] src]# lsusb Bus 004 Device 001: ID 0000:0000 Bus 003 Device 002: ID 0592:0002 Powerware Corp. Bus 003 Device 001: ID 0000:0000 Bus 002 Device 001: ID 0000:0000 Bus 005 Device 001: ID 0000:0000 Bus 001 Device 001: ID 0000:0000 ------------------------------- [EMAIL PROTECTED] src]# cat /proc/bus/usb/devices ...... T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0592 ProdID=0002 Rev= 0.50 S: Manufacturer=Powerware S: Product=Powerware UPS C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=20ms ----------------------------- I have set the port to auto but I can not make it work What do I need to set the port to? I have tried /sbin/bcmxcp_usb /proc/bus/usb/003/002 it says it can not find the UPS device on USB Bus.... Thanks Steve
-- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.
_______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
