Hi Steve. sön 2007-02-04 klockan 03:30 +1100 skrev Steve Simeonidis: > I have an FC5 system with a powerware 5110 usb ups. > > The system seems to find the UPS > > ------------------------------ > [EMAIL PROTECTED] src]# lsusb > Bus 004 Device 001: ID 0000:0000 > Bus 003 Device 002: ID 0592:0002 Powerware Corp. > Bus 003 Device 001: ID 0000:0000 > Bus 002 Device 001: ID 0000:0000 > Bus 005 Device 001: ID 0000:0000 > Bus 001 Device 001: ID 0000:0000 > ------------------------------- > > [EMAIL PROTECTED] src]# cat /proc/bus/usb/devices > ...... > > T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0 > D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > P: Vendor=0592 ProdID=0002 Rev= 0.50 > S: Manufacturer=Powerware > S: Product=Powerware UPS > C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA > I: If#= 0 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) > E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=20ms > > -----------------------------
Yep that looks OK. > > I have set the port to auto but I can not make it work > > What do I need to set the port to? > The ups.conf should look something like this. [pw5110] driver = bcmxcp_usb port = auto shutdown_delay = 60 desc = "USB ups" Now try to start the driver like this. /sbin/bcmxcp_usb -a pw5110 If it spit out something like this -------- Network UPS Tools - BCMXCP UPS driver 0.11 (2.0.5) Model = POWERWARE UPS 500VA Firmware = Cont:00.80 Inve:00.60 Shutdown delay = 60 seconds -------- Then it is ok. If not then check the you have the right udev rules installed. Kjell _______________________________________________ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser