Hi, Kjell, Kjell Claesson wrote: > Can you upgrade to 2.0.5, or any better if you can use the svn trunk.
Thanks very much for your pointer. I'm currently trying to compile but it appears to be broken on my Debian (stable) system. The issue here is that the configure script appears to assume that both libgd and libXpm will be in the same place, but here libgd is indeed in /usr/lib, but libXpm is in /usr/X11R6/lib. I know how to fix that in a plain makefile (adding -L/usr/X11R6/lib just before -lXpm) but I'm not very good on autoconf stuff. Anyway, here's the list of alarms you asked about: ommunications with UPS re-established Shutdown delay = 120 seconds Index Offset Format NUT 0015 0000 61 None 0021 0004 61 None 0023 0008 61 None 0027 0012 61 output.frequency 0028 0016 61 input.frequency 0029 0020 61 None 0033 0024 61 battery.voltage 0034 0028 f0 battery.charge 0035 0032 f0 battery.runtime 0036 0036 f0 None 0056 0040 61 input.voltage 0059 0044 61 None 0062 0048 61 ambient.temperature 0071 0052 61 None 0074 0056 61 None 0075 0060 61 None Length of alarm map: 25 Index Alarm Supported 0000 INVERTER_AC_OVER_VOLTAGE Yes 0001 INVERTER_AC_UNDER_VOLTAGE Yes -001 INVERTER_OVER_OR_UNDER_FREQ No -001 BYPASS_AC_OVER_VOLTAGE No -001 BYPASS_AC_UNDER_VOLTAGE No -001 BYPASS_OVER_OR_UNDER_FREQ No 0002 INPUT_AC_OVER_VOLTAGE Yes 0003 INPUT_AC_UNDER_VOLTAGE Yes -001 INPUT_UNDER_OR_OVER_FREQ No -001 OUTPUT_OVER_VOLTAGE No -001 OUTPUT_UNDER_VOLTAGE No -001 OUTPUT_UNDER_OR_OVER_FREQ No -001 REMOTE_EMERGENCY_PWR_OFF No -001 REMOTE_GO_TO_BYPASS No -001 BUILDING_ALARM_6 No -001 BUILDING_ALARM_5 No -001 BUILDING_ALARM_4 No -001 BUILDING_ALARM_3 No -001 BUILDING_ALARM_2 No -001 BUILDING_ALARM_1 No -001 STATIC_SWITCH_OVER_TEMP No -001 CHARGER_OVER_TEMP No -001 CHARGER_LOGIC_PWR_FAIL No -001 CHARGER_OVER_VOLTAGE_OR_CURRENT No 0004 INVERTER_OVER_TEMP Yes 0005 OUTPUT_OVERLOAD Yes 0006 RECTIFIER_INPUT_OVER_CURRENT Yes -001 INVERTER_OUTPUT_OVER_CURRENT No 0007 DC_LINK_OVER_VOLTAGE Yes 0008 DC_LINK_UNDER_VOLTAGE Yes -001 RECTIFIER_FAILED No -001 INVERTER_FAULT No -001 BATTERY_CONNECTOR_FAIL No -001 BYPASS_BREAKER_FAIL No 0009 CHARGER_FAIL Yes -001 RAMP_UP_FAILED No -001 STATIC_SWITCH_FAILED No -001 ANALOG_AD_REF_FAIL No -001 BYPASS_UNCALIBRATED No -001 RECTIFIER_UNCALIBRATED No -001 OUTPUT_UNCALIBRATED No -001 INVERTER_UNCALIBRATED No -001 DC_VOLT_UNCALIBRATED No -001 OUTPUT_CURRENT_UNCALIBRATED No -001 RECTIFIER_CURRENT_UNCALIBRATED No -001 BATTERY_CURRENT_UNCALIBRATED No -001 INVERTER_ON_OFF_STAT_FAIL No -001 BATTERY_CURRENT_LIMIT No 0010 INVERTER_STARTUP_FAIL Yes -001 ANALOG_BOARD_AD_STAT_FAIL No 0011 OUTPUT_CURRENT_OVER_100 Yes -001 BATTERY_GROUND_FAULT No -001 WAITING_FOR_CHARGER_SYNC No -001 NV_RAM_FAIL No -001 ANALOG_BOARD_AD_TIMEOUT No -001 SHUTDOWN_IMMINENT No -001 BATTERY_LOW No 0012 UTILITY_FAIL Yes -001 OUTPUT_SHORT_CIRCUIT No -001 UTILITY_NOT_PRESENT No -001 FULL_TIME_CHARGING No -001 FAST_BYPASS_COMMAND No -001 AD_ERROR No -001 INTERNAL_COM_FAIL No -001 RECTIFIER_SELFTEST_FAIL No -001 RECTIFIER_EEPROM_FAIL No -001 RECTIFIER_EPROM_FAIL No -001 INPUT_LINE_VOLTAGE_LOSS No -001 BATTERY_DC_OVER_VOLTAGE No -001 POWER_SUPPLY_OVER_TEMP No -001 POWER_SUPPLY_FAIL No -001 POWER_SUPPLY_5V_FAIL No -001 POWER_SUPPLY_12V_FAIL No -001 HEATSINK_OVER_TEMP No -001 HEATSINK_TEMP_SENSOR_FAIL No -001 RECTIFIER_CURRENT_OVER_125 No -001 RECTIFIER_FAULT_INTERRUPT_FAIL No -001 RECTIFIER_POWER_CAPASITOR_FAIL No -001 INVERTER_PROGRAM_STACK_ERROR No -001 INVERTER_BOARD_SELFTEST_FAIL No -001 INVERTER_AD_SELFTEST_FAIL No -001 INVERTER_RAM_SELFTEST_FAIL No -001 NV_MEMORY_CHECKSUM_FAIL No -001 PROGRAM_CHECKSUM_FAIL No -001 INVERTER_CPU_SELFTEST_FAIL No -001 NETWORK_NOT_RESPONDING No -001 FRONT_PANEL_SELFTEST_FAIL No -001 NODE_EEPROM_VERIFICATION_ERROR No -001 OUTPUT_AC_OVER_VOLT_TEST_FAIL No -001 OUTPUT_DC_OVER_VOLTAGE No 0013 INPUT_PHASE_ROTATION_ERROR Yes -001 INVERTER_RAMP_UP_TEST_FAILED No -001 INVERTER_OFF_COMMAND No -001 INVERTER_ON_COMMAND No -001 TO_BYPASS_COMMAND No -001 FROM_BYPASS_COMMAND No -001 AUTO_MODE_COMMAND No -001 EMERGENCY_SHUTDOWN_COMMAND No -001 SETUP_SWITCH_OPEN No -001 INVERTER_OVER_VOLT_INT No -001 INVERTER_UNDER_VOLT_INT No -001 ABSOLUTE_DCOV_ACOV No -001 PHASE_A_CURRENT_LIMIT No -001 PHASE_B_CURRENT_LIMIT No -001 PHASE_C_CURRENT_LIMIT No 0014 BYPASS_NOT_AVAILABLE Yes -001 RECTIFIER_BREAKER_OPEN No -001 BATTERY_CONTACTOR_OPEN No -001 INVERTER_CONTACTOR_OPEN No -001 BYPASS_BREAKER_OPEN No -001 INV_BOARD_ACOV_INT_TEST_FAIL No -001 INVERTER_OVER_TEMP_TRIP No -001 INV_BOARD_ACUV_INT_TEST_FAIL No -001 INVERTER_VOLTAGE_FEEDBACK_ERROR No -001 DC_UNDER_VOLTAGE_TIMEOUT No -001 AC_UNDER_VOLTAGE_TIMEOUT No -001 DC_UNDER_VOLTAGE_WHILE_CHARGE No -001 INVERTER_VOLTAGE_BIAS_ERROR No -001 RECTIFIER_PHASE_ROTATION No -001 BYPASS_PHASER_ROTATION No -001 SYSTEM_INTERFACE_BOARD_FAIL No -001 PARALLEL_BOARD_FAIL No -001 LOST_LOAD_SHARING_PHASE_A No -001 LOST_LOAD_SHARING_PHASE_B No -001 LOST_LOAD_SHARING_PHASE_C No -001 DC_OVER_VOLTAGE_TIMEOUT No 0015 BATTERY_TOTALLY_DISCHARGED Yes -001 INVERTER_PHASE_BIAS_ERROR No -001 INVERTER_VOLTAGE_BIAS_ERROR_2 No -001 DC_LINK_BLEED_COMPLETE No -001 LARGE_CHARGER_INPUT_CURRENT No -001 INV_VOLT_TOO_LOW_FOR_RAMP_LEVEL No -001 LOSS_OF_REDUNDANCY No -001 LOSS_OF_SYNC_BUS No -001 RECTIFIER_BREAKER_SHUNT_TRIP No -001 LOSS_OF_CHARGER_SYNC No -001 INVERTER_LOW_LEVEL_TEST_TIMEOUT No -001 OUTPUT_BREAKER_OPEN No -001 CONTROL_POWER_ON No -001 INVERTER_ON No -001 CHARGER_ON No -001 BYPASS_ON No -001 BYPASS_POWER_LOSS No -001 ON_MANUAL_BYPASS No -001 BYPASS_MANUAL_TURN_OFF No -001 INVERTER_BLEEDING_DC_LINK_VOLT No -001 CPU_ISR_ERROR No -001 SYSTEM_ISR_RESTART No -001 PARALLEL_DC No -001 BATTERY_NEEDS_SERVICE No -001 BATTERY_CHARGING No -001 BATTERY_NOT_CHARGED No -001 DISABLED_BATTERY_TIME No -001 SERIES_7000_ENABLE No -001 OTHER_UPS_ON No -001 PARALLEL_INVERTER No -001 UPS_IN_PARALLEL No -001 OUTPUT_BREAKER_REALY_FAIL No -001 CONTROL_POWER_OFF No -001 LEVEL_2_OVERLOAD_PHASE_A No -001 LEVEL_2_OVERLOAD_PHASE_B No -001 LEVEL_2_OVERLOAD_PHASE_C No -001 LEVEL_3_OVERLOAD_PHASE_A No -001 LEVEL_3_OVERLOAD_PHASE_B No -001 LEVEL_3_OVERLOAD_PHASE_C No -001 LEVEL_4_OVERLOAD_PHASE_A No -001 LEVEL_4_OVERLOAD_PHASE_B No -001 LEVEL_4_OVERLOAD_PHASE_C No 0016 UPS_ON_BATTERY Yes 0017 UPS_ON_BYPASS Yes -001 LOAD_DUMPED No -001 LOAD_ON_INVERTER No -001 UPS_ON_COMMAND No -001 UPS_OFF_COMMAND No -001 LOW_BATTERY_SHUTDOWN No -001 AUTO_ON_ENABLED No -001 SOFTWARE_INCOMPABILITY_DETECTED No -001 INVERTER_TEMP_SENSOR_FAILED No -001 DC_START_OCCURED No -001 IN_PARALLEL_OPERATION No -001 SYNCING_TO_BYPASS No -001 RAMPING_UPS_UP No -001 INVERTER_ON_DELAY No -001 CHARGER_ON_DELAY No -001 WAITING_FOR_UTIL_INPUT No -001 CLOSE_BYPASS_BREAKER No -001 TEMPORARY_BYPASS_OPERATION No -001 SYNCING_TO_OUTPUT No -001 BYPASS_FAILURE No -001 AUTO_OFF_COMMAND_EXECUTED No -001 AUTO_ON_COMMAND_EXECUTED No -001 BATTERY_TEST_FAILED No 0018 FUSE_FAIL Yes -001 FAN_FAIL No -001 SITE_WIRING_FAULT No -001 BACKFEED_CONTACTOR_FAIL No -001 ON_BUCK No -001 ON_BOOST No -001 ON_DOUBLE_BOOST No -001 BATTERIES_DISCONNECTED No -Steve _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
