I've got some strange problem with NUT on my 5115 on Debian Etch: ---snip--- $ sudo ./bcmxcp_usb -DDDDDDD -a 5115 Network UPS Tools - BCMXCP UPS driver 0.13 (2.3.0-1181)
Warning: This is an experimental driver. Some features may not function correctly. debug level is '7' Can't set POWERWARE USB configuration Unable to find POWERWARE UPS device on USB bus Things to try: - Connect UPS device to USB bus - Run this driver as another user (upsdrvctl -u or 'user=...' in ups.conf). See upsdrvctl(8) and ups.conf(5). Fatal error: unusable configuration [EMAIL PROTECTED]:/opt/nut/bin$ sudo ./bcmxcp_usb -DDDDDDD -a 5115 -u root Network UPS Tools - BCMXCP UPS driver 0.13 (2.3.0-1181) Warning: This is an experimental driver. Some features may not function correctly. debug level is '7' Communications with UPS lost: Receive error (Request command): COMMAND: 31 RECONNECT USB DEVICE Communications with UPS lost: Receive error (Request command): COMMAND: 31 RECONNECT USB DEVICE Communications with UPS lost: Receive error (Request command): COMMAND: 31 RECONNECT USB DEVICE Communications with UPS lost: Receive error (Request command): COMMAND: 31 RECONNECT USB DEVICE Communications with UPS lost: Receive error (Request command): COMMAND: 31 RECONNECT USB DEVICE Communications with UPS lost: Error executing command Could not communicate with the ups: Inappropriate ioctl for device ---snip--- Saw a similar issue earlier on this list, but it was never solved. Any ideas? _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
