Den Monday 18 February 2008 15.25.26 skrev Daniel Nyström: OK, There have been some updates to the configure script and some other things.
You may have to do a 'autoreconf' first so you have a fresh configure script. Kjell > I just updated my svn checkout (now revision 1308), but it wasn't even > able to compile at all; > > [EMAIL PROTECTED]:~/nut-trunk$ ./configure --with-usb --without-ssl > --without-snmp --without-serial --without-ipv6 --prefix=/opt/nut > > [..snip...] > > [EMAIL PROTECTED]:~/nut-trunk$ make > [..snip...] > gcc -DHAVE_CONFIG_H -I. -I../include -I../include -O -Wall > -Wsign-compare -MT sstate.o -MD -MP -MF .deps/sstate.Tpo -c -o sstate.o > sstate.c > mv -f .deps/sstate.Tpo .deps/sstate.Po > make[1]: *** No rule to make target `access.o', needed by `upsd'. Stop. > make[1]: Leaving directory `/home/daniel/nut-trunk/server' > make: *** [all-recursive] Error 1 > [EMAIL PROTECTED]:~/nut-trunk$ > > Ideas? > > Kjell Claesson wrote: > > Den Monday 18 February 2008 10.51.35 skrev Daniel Nyström: > > > > Hi Daniel, > > > > This is fixed in tha latest trunk and also in the testing branch that is > > going to be the next release. > > > > You can grab a tarball from http://buildbot.ghz.cc/public/nut/ for Debian > > Etch. If you want to try this out. > > > > Regards > > Kjell > > > > P.S. Driver version should be 0.14 to have the fix. > > > >> Bumping this one, as there seems to be others having similar problems. > >> > >> Any ideas? > >> > >> Daniel Nyström wrote: > >>> I've got some strange problem with NUT on my 5115 on Debian Etch: > >>> ---snip--- > >>> $ sudo ./bcmxcp_usb -DDDDDDD -a 5115 -u root > >>> Network UPS Tools - BCMXCP UPS driver 0.13 (2.3.0-1181) > >>> > >>> Warning: This is an experimental driver. > >>> Some features may not function correctly. > >>> > >>> debug level is '7' > >>> Communications with UPS lost: Receive error (Request command): COMMAND: > >>> 31 > >>> > >>> RECONNECT USB DEVICE > >>> > >>> Communications with UPS lost: Receive error (Request command): COMMAND: > >>> 31 > >>> > >>> RECONNECT USB DEVICE > >>> > >>> Communications with UPS lost: Receive error (Request command): COMMAND: > >>> 31 > >>> > >>> RECONNECT USB DEVICE > >>> > >>> Communications with UPS lost: Receive error (Request command): COMMAND: > >>> 31 > >>> > >>> RECONNECT USB DEVICE > >>> > >>> Communications with UPS lost: Receive error (Request command): COMMAND: > >>> 31 > >>> > >>> RECONNECT USB DEVICE > >>> > >>> Communications with UPS lost: Error executing command > >>> Could not communicate with the ups: Inappropriate ioctl for device > >>> ---snip--- > >>> > >>> Saw a similar issue earlier on this list, but it was never solved. Any > >>> ideas? > >> > >> _______________________________________________ > >> Nut-upsuser mailing list > >> [email protected] > >> http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser > > _______________________________________________ > Nut-upsuser mailing list > [email protected] > http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
