Den Monday 18 February 2008 16.03.23 skrev Daniel Nyström: OK, > Thanks! Forgot it didn't come with the repo. :) > > Now it do compile, but "configure" didn't find my missing > "dbus/dbus-glib.h". Maybe something to add to autoconf? > > But doing "make install" still halts: >
Yep there have been some issues with the install path. But as I think you are going to run nut as standard and not with hal, you may add --whitout-hal to the configure. As it looks like it stop on that. Kjell > /bin/sh ../libtool --mode=install /usr/bin/install -c 'mge-xml' > '/opt/nut/bin/mge-xml' > /usr/bin/install -c mge-xml /opt/nut/bin/mge-xml > /bin/sh ../libtool --mode=install /usr/bin/install -c 'upsdrvctl' > '/opt/nut/bin/upsdrvctl' > /usr/bin/install -c upsdrvctl /opt/nut/bin/upsdrvctl > test -z "" || /bin/mkdir -p "" > /bin/sh ../libtool --mode=install /usr/bin/install -c > 'hald-addon-usbhid-ups' '/hald-addon-usbhid-ups' > libtool: install: `' must be an absolute directory name > Try `libtool --help --mode=install' for more information. > make[2]: *** [install-halexecPROGRAMS] Error 1 > make[2]: Leaving directory `/home/daniel/nut-trunk/drivers' > make[1]: *** [install-am] Error 2 > make[1]: Leaving directory `/home/daniel/nut-trunk/drivers' > make: *** [install-recursive] Error 1 > [EMAIL PROTECTED]:~/nut-trunk$ > > I guess it's pretty simple, since all other files works. > > Kjell Claesson wrote: > > Den Monday 18 February 2008 15.25.26 skrev Daniel Nyström: > > OK, > > > > There have been some updates to the configure script and some other > > things. > > > > You may have to do a 'autoreconf' first so you have a fresh configure > > script. > > > > Kjell > > > >> I just updated my svn checkout (now revision 1308), but it wasn't even > >> able to compile at all; > >> > >> [EMAIL PROTECTED]:~/nut-trunk$ ./configure --with-usb --without-ssl > >> --without-snmp --without-serial --without-ipv6 --prefix=/opt/nut > >> > >> [..snip...] > >> > >> [EMAIL PROTECTED]:~/nut-trunk$ make > >> [..snip...] > >> gcc -DHAVE_CONFIG_H -I. -I../include -I../include -O -Wall > >> -Wsign-compare -MT sstate.o -MD -MP -MF .deps/sstate.Tpo -c -o sstate.o > >> sstate.c > >> mv -f .deps/sstate.Tpo .deps/sstate.Po > >> make[1]: *** No rule to make target `access.o', needed by `upsd'. Stop. > >> make[1]: Leaving directory `/home/daniel/nut-trunk/server' > >> make: *** [all-recursive] Error 1 > >> [EMAIL PROTECTED]:~/nut-trunk$ > >> > >> Ideas? > >> > >> Kjell Claesson wrote: > >>> Den Monday 18 February 2008 10.51.35 skrev Daniel Nyström: > >>> > >>> Hi Daniel, > >>> > >>> This is fixed in tha latest trunk and also in the testing branch that > >>> is going to be the next release. > >>> > >>> You can grab a tarball from http://buildbot.ghz.cc/public/nut/ for > >>> Debian Etch. If you want to try this out. > >>> > >>> Regards > >>> Kjell > >>> > >>> P.S. Driver version should be 0.14 to have the fix. > >>> > >>>> Bumping this one, as there seems to be others having similar problems. > >>>> > >>>> Any ideas? > >>>> > >>>> Daniel Nyström wrote: > >>>>> I've got some strange problem with NUT on my 5115 on Debian Etch: > >>>>> ---snip--- > >>>>> $ sudo ./bcmxcp_usb -DDDDDDD -a 5115 -u root > >>>>> Network UPS Tools - BCMXCP UPS driver 0.13 (2.3.0-1181) > >>>>> > >>>>> Warning: This is an experimental driver. > >>>>> Some features may not function correctly. > >>>>> > >>>>> debug level is '7' > >>>>> Communications with UPS lost: Receive error (Request command): > >>>>> COMMAND: 31 > >>>>> > >>>>> RECONNECT USB DEVICE > >>>>> > >>>>> Communications with UPS lost: Receive error (Request command): > >>>>> COMMAND: 31 > >>>>> > >>>>> RECONNECT USB DEVICE > >>>>> > >>>>> Communications with UPS lost: Receive error (Request command): > >>>>> COMMAND: 31 > >>>>> > >>>>> RECONNECT USB DEVICE > >>>>> > >>>>> Communications with UPS lost: Receive error (Request command): > >>>>> COMMAND: 31 > >>>>> > >>>>> RECONNECT USB DEVICE > >>>>> > >>>>> Communications with UPS lost: Receive error (Request command): > >>>>> COMMAND: 31 > >>>>> > >>>>> RECONNECT USB DEVICE > >>>>> > >>>>> Communications with UPS lost: Error executing command > >>>>> Could not communicate with the ups: Inappropriate ioctl for device > >>>>> ---snip--- > >>>>> > >>>>> Saw a similar issue earlier on this list, but it was never solved. > >>>>> Any ideas? > >>>> > >>>> _______________________________________________ > >>>> Nut-upsuser mailing list > >>>> [email protected] > >>>> http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser > >> > >> _______________________________________________ > >> Nut-upsuser mailing list > >> [email protected] > >> http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser > > _______________________________________________ > Nut-upsuser mailing list > [email protected] > http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
