Greg, I forgot to add that I'm interested in an upsc output of the working version (ubuntu 8.10 with 2.2.2...)
thanks (and sorry for top posting) Arnaud 2009/4/22 Arnaud Quette <[email protected]> > Greg, Kjell, > > 2009/4/21 Kjell Claesson <[email protected]> > >> tisdag 21 april 2009 14:43:28 skrev Greg: >> > Hi Kjell, >> > >> Hi Greg, >> >> > Sorry for the late reply been doing a lot of testing. >> No problem. >> >> > I got the package from >> > >> http://ipkg.nslu2-linux.org/feeds/optware/cs05q3armel/cross/stable/nut_2.4 >> . >> >1-1_arm.ipk It pretty much pre-compiled which are then extracted to the >> > device on installation. >> OK. >> >> > >> > I tested nut and the 5115 under Ubuntu 8.10. Ubuntu comes with nut 2.2.2 >> by >> > default which works fine. I installed 2.4.1 which does not work either. >> > >> This is not so good. Then we may have a bug introduced to the nut_usb. >> I cc this mail to Arnaud. >> Arnaud can you run some tests on the PW5115 with NUT 2.4.1 ? >> We may have broken something from version 2.2.2. >> >> But it may be the package also but I think Arnaud is working on that to. >> > > well, the packages (and ipk are iirc kinda simplified debs) are quite > straighforward. > the "nut" package (for example on Ubuntu) includes the core and the > serial/usb drivers, with the udev file and so on. the hal support is in > another packages that is conflicting with the "nut" one (in order to avoid > runtime conflict between the classic and hal drivers). > > The error: >> > USB error: could not set config 1: Device or resource busy >> > Can't set POWERWARE USB configuration >> > Unable to find POWERWARE UPS device on USB bus >> Is indicating that something is already running. >> Did you check that the debug run was the only thing running at the moment. >> > > yup, 2nded. > Greg: can you try again this test please. > > > So I compiled and installed 2.2.2 on my QNAP device and it still doesn't >> > work. >> > 2.2.2 was compiled on my QNAP without HAL support just USB support. >> Yes, and I see that you get the same error as you get on 2.4.1 on the >> QNAP. >> >> The problem is that I don't have any 5115 to test this on. So I hope that >> Arnaud can test this. My PW3105 is running fine on usb on 2.4.1. >> > > I've just made some test on PW5115 500i (500VA), nut 2.4.1(-2 ; packaged) > on an Ubuntu 8.10. Everything was fine. same goes for 2.2.2 (from source > this time) > the firmwares are: > - USB: 01.00 > - Main:10.04 > > This is the only 5115 I have underhand, but what is puzzling me is the > exact model name: > - mine (with 2.2.2) displays "Model = PW5115 500i 500VA" > - while Greg's displays "Model = 51150500A 500VA" > > a subtle difference! though the 2 firmwares (USB and main) are identical. > iirc, this value (the name) can be changed. Have you done so Greg? > > I'm still learning PW, and will have to check with the PW people there. > more info soon > > cheers, > Arnaud > -- > Linux / Unix Expert R&D - Eaton - http://www.eaton.com/mgeops > Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/ > Debian Developer - http://www.debian.org > Free Software Developer - http://arnaud.quette.free.fr/
_______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
