Hi! There is continue of my story with Ippon smart power 2000 and nut, i'm enable usb in kernel and nut give following information: -------------------- gate# cat ups.conf [IPPON] driver = megatec_usb port = /dev/ugen0 vendorid = 0665 productid = 5161 subdriver = phoenix desc = "Ippon Smart power 2000" ---------------------
gate# lsusb Bus /dev/usb1 Device /dev/ugen0: ID 0665:5161 gate# /usr/local/libexec/nut/megatec_usb -u root -DDD -a IPPON Network UPS Tools - Megatec protocol driver 1.6 (2.4.1) Serial-over-USB transport layer 0.10 debug level is '3' Checking device (0665/5161) (/dev/usb1//dev/ugen0) - VendorID: 0665 - ProductID: 5161 - Manufacturer: Cypress Semiconductor - Product: USB to Serial - Serial Number: unknown - Bus: /dev/usb1 Trying to match device Device matches DTR=1, RTS=0 Starting UPS detection process... Asking for UPS information [I]... I => FAILED [short read] I detail: (1 bytes) => 49 Asking for UPS status [Q1]... get_data_phoenix: got so far [(224.8 2] get_data_phoenix: got so far [(224.8 224.3 223] get_data_phoenix: got so far [(224.8 224.3 223.7 021 5] get_data_phoenix: got so far [(224.8 224.3 223.7 021 50.0 27.6] Q1 => FAILED [short read] Q1 detail: (32 bytes) => 28 32 32 34 2e 38 20 32 32 34 2e 33 20 32 32 33 2e 37 20 30 32 31 20 35 30 2e 30 20 32 37 2e 36 Asking for UPS status [Q1]... get_data_phoenix: got so far [(224.8 2] get_data_phoenix: got so far [(224.8 224.8 223] get_data_phoenix: got so far [(224.8 224.8 223.7 021 5] Q1 => FAILED [short read] Q1 detail: (24 bytes) => 28 32 32 34 2e 38 20 32 32 34 2e 38 20 32 32 33 2e 37 20 30 32 31 20 35 Asking for UPS status [Q1]... get_data_phoenix: got so far [0.1 27.6] get_data_phoenix: got so far [0.1 27.6(224.8 2] get_data_phoenix: got so far [0.1 27.6(224.8 224.8 223] get_data_phoenix: got so far [0.1 27.6(224.8 224.8 223.7 021 5] get_data_phoenix: got so far [0.1 27.6(224.8 224.8 223.7 021 50.0 27.6] Q1 => FAILED [short read] Q1 detail: (40 bytes) => 30 2e 31 20 32 37 2e 36 28 32 32 34 2e 38 20 32 32 34 2e 38 20 32 32 33 2e 37 20 30 32 31 20 35 30 2e 30 20 32 37 2e 36 Asking for UPS status [Q1]... get_data_phoenix: got so far [(224.3 2] get_data_phoenix: got so far [(224.3 224.3 223] get_data_phoenix: got so far [(224.3 224.3 223.3 021 5] Q1 => FAILED [short read] Q1 detail: (24 bytes) => 28 32 32 34 2e 33 20 32 32 34 2e 33 20 32 32 33 2e 33 20 30 32 31 20 35 Asking for UPS status [Q1]... get_data_phoenix: got so far [0.0 27.6] get_data_phoenix: got so far [0.0 27.6(224.8 2] get_data_phoenix: got so far [0.0 27.6(224.8 224.3 223] get_data_phoenix: got so far [0.0 27.6(224.8 224.3 223.7 021 5] get_data_phoenix: got so far [0.0 27.6(224.8 224.3 223.7 021 50.1 27.6] Q1 => FAILED [short read] Q1 detail: (40 bytes) => 30 2e 30 20 32 37 2e 36 28 32 32 34 2e 38 20 32 32 34 2e 33 20 32 32 33 2e 37 20 30 32 31 20 35 30 2e 31 20 32 37 2e 36 5 out of 5 detection attempts failed (minimum failures: 2). Megatec protocol UPS not detected. gate# Asking for UPS information [I]... I => FAILED [short read] I detail: (1 bytes) => 49 Asking for UPS status [Q1]... get_data_phoenix: got so far [(224.8 2] get_data_phoenix: got so far [(224.8 224.3 223] get_data_phoenix: got so far [(224.8 224.3 223.7 021 5] get_data_phoenix: got so far [(224.8 224.3 223.7 021 50.0 27.6] Q1 => FAILED [short read] Q1 detail: (32 bytes) => 28 32 32 34 2e 38 20 32 32 34 2e 33 20 32 32 33 2e 37 20 30 32 31 20 35 30 2e 30 20 32 37 2e 36 Asking for UPS status [Q1]... get_data_phoenix: got so far [(224.8 2] get_data_phoenix: got so far [(224.8 224.8 223] get_data_phoenix: got so far [(224.8 224.8 223.7 021 5] Q1 => FAILED [short read] Q1 detail: (24 bytes) => 28 32 32 34 2e 38 20 32 32 34 2e 38 20 32 32 33 2e 37 20 30 32 31 20 35 Asking for UPS status [Q1]... get_data_phoenix: got so far [0.1 27.6] get_data_phoenix: got so far [0.1 27.6(224.8 2] get_data_phoenix: got so far [0.1 27.6(224.8 224.8 223] get_data_phoenix: got so far [0.1 27.6(224.8 224.8 223.7 021 5] get_data_phoenix: got so far [0.1 27.6(224.8 224.8 223.7 021 50.0 27.6] Q1 => FAILED [short read] Q1 detail: (40 bytes) => 30 2e 31 20 32 37 2e 36 28 32 32 34 2e 38 20 32 32 34 2e 38 20 32 32 33 2e 37 20 30 32 31 20 35 30 2e 30 20 32 37 2e 36 Asking for UPS status [Q1]... get_data_phoenix: got so far [(224.3 2] get_data_phoenix: got so far [(224.3 224.3 223] get_data_phoenix: got so far [(224.3 224.3 223.3 021 5] Q1 => FAILED [short read] Q1 detail: (24 bytes) => 28 32 32 34 2e 33 20 32 32 34 2e 33 20 32 32 33 2e 33 20 30 32 31 20 35 Asking for UPS status [Q1]... get_data_phoenix: got so far [0.0 27.6] get_data_phoenix: got so far [0.0 27.6(224.8 2] get_data_phoenix: got so far [0.0 27.6(224.8 224.3 223] get_data_phoenix: got so far [0.0 27.6(224.8 224.3 223.7 021 5] get_data_phoenix: got so far [0.0 27.6(224.8 224.3 223.7 021 50.1 27.6] Q1 => FAILED [short read] Q1 detail: (40 bytes) => 30 2e 30 20 32 37 2e 36 28 32 32 34 2e 38 20 32 32 34 2e 33 20 32 32 33 2e 37 20 30 32 31 20 35 30 2e 31 20 32 37 2e 36 5 out of 5 detection attempts failed (minimum failures: 2). Megatec protocol UPS not detected. > Здравствуйте, Nut-upsuser. > There is output of megatec_usb -u root -DDD -a IPPON > ============================================================ > /usr/local/libexec/nut/megatec_usb -u root -DDD -a IPPON > Network UPS Tools - Megatec protocol driver 1.6 (2.4.1) > Serial-over-USB transport layer 0.10 > debug level is '3' > No appropriate HID device found > No supported devices found. Please check your device availability with 'lsusb' > and make sure you have an up-to-date version of NUT. If this does not help, > try running the driver with at least 'vendorid' and 'subdriver' options > specified. Please refer to the man page for details about these options > (man 8 megatec_usb). > Please report your results to the NUT user's mailing list > <[email protected]>. > ============================================================ > In which archives i need to search solution? Maybe FreeBSD mailing > lists can help, if that, to which category relate this question? I > just think that if i ask in FreeBSD mailing list they answer that > this is problem of nut developers. > P.S. Sorry for my bad English :) -- С уважением, vk mailto:[email protected] _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
