> At least you're able to talk to the UPS now. Could you please retry > with the 'blazer_usb' driver? I'm not sure if this will fix things, > but since I wrote this one, I'm more familiar with its operation. You > should only have to change the line
> driver = blazer_usb > and you should be up and running. If this works, make sure to checkout > 'man 8 blazer' to get an idea on all the features that are supported > by this driver. > Best regards, Arjen I change driver to blazer_usb, it is not help. ------------------------------ gate# /usr/local/libexec/nut/blazer_usb -u root -DDD -a IPPON Network UPS Tools - Megatec/Q1 protocol USB driver 0.03 (2.4.1) debug level is '3' Checking device (0665/5161) (/dev/usb1//dev/ugen0) - VendorID: 0665 - ProductID: 5161 - Manufacturer: Cypress Semiconductor - Product: USB to Serial - Serial Number: unknown - Bus: /dev/usb1 Trying to match device Device matches Trying megatec protocol... send: Q1 read: timeout blazer_status: short reply Status read 1 failed send: Q1 read: timeout blazer_status: short reply Status read 2 failed send: Q1 read: timeout blazer_status: short reply Status read 3 failed Trying mustek protocol... send: QS read: timeout blazer_status: short reply Status read 1 failed send: QS read: timeout blazer_status: short reply Status read 2 failed send: QS read: timeout blazer_status: short reply Status read 3 failed Trying megatec/old protocol... send: D read: timeout blazer_status: short reply Status read 1 failed send: D read: timeout blazer_status: short reply Status read 2 failed send: D read: timeout blazer_status: short reply Status read 3 failed No supported UPS detected -- С уважением, vk mailto:[email protected] _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
