Also, is this the same UPS that had EMI issues in the past? What brand and model is it?

On Oct 27, 2009, at 6:36 AM, "Antoine Gatineau" <antoine.gatin...@alcatel-lucent.com > wrote:

Hello,

I'm back again on this issue.
I have contacted Red Hat support but they won't do anything to help since it is not an official Red Hat package. Unless I prove the conflict come from
RH.

So I am trying to figure out what is going on.

Adding -DDDDD will not add any more log at the services stop.

When I look at the sources, I couldn't find the piece of code that release properly the usb UPS device. There is just a normal SIGTERM handling. Is
this normal?

I also noticed that there are debug logs but I don't know how to activate
them... Can somebody tell me how to do it?

Do you have any advice on how to debug this? I have not seen anything
particuliar about IRQs and there is no message in syslog when stopping ups.

The fact is that I don't know at all what is blocking my network card and
even less why... :(

Thanks,
Antoine



-----Message d'origine-----
De : Charles Lepple [mailto:clep...@gmail.com]
Envoyé : vendredi 2 octobre 2009 01:05
À : Antoine Gatineau
Cc : nut-upsuser@lists.alioth.debian.org
Objet : Re: [Nut-upsuser] stopping ups services resets my network

On Mon, Sep 28, 2009 at 6:40 AM, Antoine Gatineau
<antoine.gatin...@alcatel-lucent.com> wrote:
Hello,


I have this issue: ups is working fine for a time but when I stop the
services or if I unplug the ups device (over usb) I get the following
in /var/log/messages

I am running nut-2.4.1 on RHEL4.

Sep 28 14:44:57 mabolas upsd[24151]: Signal 15: exiting Sep 28
14:45:06 mabolas upsmon[24156]: Signal 15: exiting Sep 28 15:04:10
mabolas sshd(pam_unix)[29190]: session closed for user root Sep 28
15:04:36 mabolas kernel: NETDEV WATCHDOG: eth0: transmit timed out Sep
28 15:04:36 mabolas kernel: tg3: eth0: transmit timed out, resetting
Sep 28 15:04:36 mabolas kernel: tg3: DEBUG: MAC_TX_STATUS[00000008]
MAC_RX_STATUS[00000000] Sep 28 15:04:36 mabolas kernel: tg3: DEBUG:
RDMAC_STATUS[00000000] WDMAC_STATUS[00000000] Sep 28 15:04:36 mabolas
kernel: tg3: eth0: Link is down.
Sep 28 15:04:38 mabolas kernel: tg3: eth0: Link is up at 1000 Mbps,
full duplex.
Sep 28 15:04:38 mabolas kernel: tg3: eth0: Flow control is off for TX
and off for RX.

This sounds like a bug in the tg3 driver in that kernel version. Have you
checked the RedHat bugzilla to see if anyone else sees this?

Depending on how the motherboard is laid out, moving the UPS to a different
USB port might avoid this problem. It could have something to do with
interrupt handling (for example, the tg3 driver expects an interrupt that is
stolen by the USB controller).

--
- Charles Lepple


_______________________________________________
Nut-upsuser mailing list
Nut-upsuser@lists.alioth.debian.org
http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser

_______________________________________________
Nut-upsuser mailing list
Nut-upsuser@lists.alioth.debian.org
http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser

Reply via email to