On 03/08/2012 02:37 PM, Arnaud Quette wrote: > 2012/3/7 Zach La Celle <[email protected]>: >> On 3/7/2012 11:53 AM, Arnaud Quette wrote: >>> >>> 2012/3/5 Zach La Celle<[email protected]>: >>>> >>>> Still getting the usbhid-ups Report 89 / Report 90 issues...output below. >>> >>> hem, there was a bug in the developer, mixing hexa and decimal :-/ >>> the reportIDs are really hexa! >>> >>> a better patch is attached, same data needed than before please. >>> >>> cheers, >>> Arno >> >> >> Looks like you have good hex for the reportIDs at the bottom of usbhid-ups >> output. > > indeed, and it only confirms that we're not missing anything. > I'm still not sure about those 2 reports purpose. > we may investigate this to see if there's more data out there. > > sorry, nothing to do about line frequency, load percentage, and temperature. > (apart from changing your UPS for something else ;-) > these are simply not reported by your unit! > > cheers, > Arnaud
My final response (for completeness) for this issue is to say that I purchased the AP9620 legacy adapter card, and using the apcsmart driver I now receive all of the information I got from the older UPS. So, if anybody else is in this situation, that is one option. -Zach _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
