Hello Terry and all,
I doubt you can put any card (besides ORiNOCO cards [Gold, Silver,
Bronze]) in a stock RG-1000. I had upgraded the firmware to Karlnet SE-4500,
that's probably why it was able to handle the Prism based card (Senao
200mW). Also, the range varies on the card in the RG. My setup is for a
point to point link since I'm trying to prevent any future signal
interference.
Also, ORiNOCO cards are also called Avaya, Lucent, Agere, and a
couple of ones. It's just a different label..
-Ben
----- Original Message -----
From: "Terry Ewing" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, October 02, 2002 1:53 PM
Subject: Re: [nycwireless] RG1000 Questions ...
> I saw a little while back that someone put a 200mw card into an rg-1000.
> Can you put any ol' 802.11b card in there? I thought these APs were
> specific to the Lucent Orinoco cards.
>
> Did the range improve significantly?
>
> --
> NYCwireless - http://www.nycwireless.net/
> Un/Subscribe: http://lists.nycwireless.net/mailman/listinfo/nycwireless/
> Archives: http://lists.nycwireless.net/pipermail/nycwireless/
>
--
NYCwireless - http://www.nycwireless.net/
Un/Subscribe: http://lists.nycwireless.net/mailman/listinfo/nycwireless/
Archives: http://lists.nycwireless.net/pipermail/nycwireless/
