On Mon, Jan 13, 2003 at 07:45:09PM -0500, [EMAIL PROTECTED] wrote:
> We are using several Linksys WAP 11's as access points. We have
> this funny (not really) thing happen where the Access Points seem to
> be working fine, we can ping them, we can log on and administer them
> using HTML, but the wireless side is DEAD. No one can see the
[snip]
I have a different problem. Last week my Linksys befw11s4 stopped
working after over a year of no problems. It had been behaving oddly
for about a week before (about Christmas) but I had guests and didn't
check it. The dhcp server was working but it wasn't routing. I
finally had some time and tried to administer it only to find that I
can't... no http. Try netcat, no response. Watch with tcpdump and see
no response. Reset it. No good. Reset to factory defaults. No
good. Upload a new flash upgrade via tftp. Succeeds but still no
administration via http. Ran a nmap scan against it and find that all
ports are filtered. Using tcpdump I see that it is broadcasting the
unPNP (udp/1900) junk across the switch ports and that on the WAN port
it is sending DHCP requests. The wireless-side dhcp server is still
working (but handing out defaults). Very strange.
Anyone seen anything like this?
- Ross
--
NYCwireless - http://www.nycwireless.net/
Un/Subscribe: http://lists.nycwireless.net/mailman/listinfo/nycwireless/
Archives: http://lists.nycwireless.net/pipermail/nycwireless/
