Hello,

    I've got all the components (mysql, perl pm, web stuff, multicast
kernel, etc) running, but when I start obs, I get the following output :



----- Obsequieum started Sat Mar 24 15:03:20 2001
AddDevices: Added device: /mnt/mp3 (HARD_DRIVE)
Hard Drive /mnt/mp3:
  faust6
Main: Volumes have been loaded.
Added /mnt/mp3/grateful dead/live concert/dead tunes.mp3 to mixer.
Added first pullbuffer. Sleeping 1 sec...
Starting transmitter...
Xmit: sendto() returned: Permission denied
Xmit: Title thread exiting.
Added /mnt/mp3/grateful dead/live concert/dead tunes.mp3 to mixer.
Xmit: sendto() returned: Permission denied
Xmit: RTPTransmitter thread exiting.

    I'm using broadcast addr 192.168.128.255 as per my network setup :

eth0      Link encap:Ethernet  HWaddr 00:40:95:03:96:B7
          inet addr:192.168.128.6  Bcast:192.168.128.255
Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:650 errors:0 dropped:0 overruns:0 frame:0
          TX packets:428 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100
          Interrupt:10 Base address:0x9060

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:3924  Metric:1
          RX packets:18 errors:0 dropped:0 overruns:0 frame:0
          TX packets:18 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0

    When I use the default broadcast address (225.2.1.5) I get the
following output :

----- Obsequieum started Sat Mar 24 15:19:34 2001
AddDevices: Added device: /mnt/mp3 (HARD_DRIVE)
Hard Drive /mnt/mp3:
  faust6
Main: Volumes have been loaded.
Added /mnt/mp3/grateful dead/live concert/dead tunes.mp3 to mixer.
Added first pullbuffer. Sleeping 1 sec...
Starting transmitter...
Xmit: sendto() returned: Network is unreachable
Xmit: Title thread exiting.
Added /mnt/mp3/grateful dead/live concert/dead tunes.mp3 to mixer.
Xmit: sendto() returned: Network is unreachable
Xmit: RTPTransmitter thread exiting.

    Any idea what I am doing wrong?  Thanks for your help.

_______________________________________________
Obs-dev mailing list
[EMAIL PROTECTED]
http://www.freeamp.org/mailman/listinfo/obs-dev

Reply via email to