Hi Giacinto,
On 8/11/19, Giacinto Cifelli <[email protected]> wrote:
> can you check with the ofono script test/list-contexts if the method
> is static or dhcp?
# ofono/test/list-contexts
[ /ubloxqmi_0 ]
[ /ubloxqmi_0/context1 ]
Name = Internet
Type = internet
AuthenticationMethod = chap
Settings = { Method=static Gateway=10.116.103.22 Netmask=255.255.255.25}
Username =
AccessPointName = telstra.m2m
Password =
Protocol = ip
IPv6.Settings = { }
Active = 1
Looks like it is static, how can change it to a correct one (dynamic
>)? Or any workarounds?
> I believe this can be the problem: if ofono managed to get an IP
> address, likely with at+cgpaddr and/or at+cgcontrdp,
> then it passes it to connman, and then it is set on the interface...
> static, with no lease expiration.
There are two devices for the SARA-R4 modem, /dev/ttyUSB0 is used for
QMI which is currently using as default protocol. /dev/ttyUSB1 is for
AT, let me know if you like to check AT command, I have never tried to
write / read AT command, are the following commands correct?
echo "at+cgpaddr" > /dev/ttyUSB1
cat < /dev/ttyUSB1
Thank you very much Giacinto.
-- jupiter
_______________________________________________
ofono mailing list
[email protected]
https://lists.ofono.org/mailman/listinfo/ofono
