deck the heads a bit more
ron
-------------- Original message --------------
From: Joe Vahabzadeh <[EMAIL PROTECTED]>
> At 02:32 AM 4/1/06 -0600, Scott wrote:
> >Hello all-
> >
> >Man...I'm kinda getting disgruntled over this whole compression thing. I
> >paid $150 for a set of 7a heads, thinking they'd get me into the 8.8:1 range
> >(per the FAQ)... Now...with the added piston-to-deck clearance, the added
> >thickness of an aftermarket head gasket, plus aftermarket pistons, plus the
> >missing cc's of having re-worked heads, I'm back down to 8.1:1.
>
>
> Well, I don't know how cheap/expensive it is, but you might gain a little
> bit of it back by going with a thinner head gasket, no?
>
> Don't recall what you said about the head gaskets you were using, or the
> availability of thinner ones.
>
>
> - Joe Vahabzadeh
