Am 10.12.14 um 20:28 schrieb Dan McDonald:
On Dec 10, 2014, at 2:23 PM, Stephan Budach <[email protected]> wrote:
This worked, but I wanted to change the MTU, so I deciced to remove this config
again:
ipadm delete-addr ixgb3/v4static
ipadm delete-if ixgbe3
Interesting. Your "dladm show-linkprop" output didn't have anything for
ixgbe3. I wonder if that happened because of the delete-if for ipadm?
Then I tried to set the MTU of ixgbe3 like this:
dladm set-linkprop -p mtu=9216 ixgbe3
I can't remember, if that already stalled, however, now dladm show-linkprop
hangs and it does need to get killed -9.
It's probably not able to find ixgbe3, and hanging. The question is how did
ixgbe3 disappear from the list of links (vs. ip addrs)?
I don't know… it seems to have serious issues with the MTU specifically…
root@nfsvmpool01:~# dladm show-phys
LINK MEDIA STATE SPEED DUPLEX DEVICE
igb0 Ethernet up 1000 full igb0
igb1 Ethernet unknown 1000 full igb1
igb2 Ethernet unknown 0 half igb2
igb3 Ethernet unknown 0 half igb3
ixgbe2 Ethernet down 0 unknown ixgbe2
ixgbe0 Ethernet up 10000 full ixgbe0
ixgbe3 Ethernet up 10000 full ixgbe3
ixgbe1 Ethernet down 0 unknown ixgbe1
root@nfsvmpool01:~# dladm show-linkprop -p mtu
LINK PROPERTY PERM VALUE DEFAULT POSSIBLE
igb0 mtu rw 1500 1500 60-9000
igb1 mtu rw 1500 1500 60-9000
igb2 mtu rw 1500 1500 60-9000
igb3 mtu rw 1500 1500 60-9000
ixgbe2 mtu rw 1500 1500 1500-15500
ixgbe0 mtu rw 1500 1500 1500-15500
^C
So, dladm shows the phys status, but it isn't able to tell me about the
MTU of ixgbe3…?
Needless to mention that ipadm also doesn't work. I will try to reset
the MTU back to 1500 again and seem if I can get the interface back.
Cheers,
budy
_______________________________________________
OmniOS-discuss mailing list
[email protected]
http://lists.omniti.com/mailman/listinfo/omnios-discuss
