Am 10.12.14 um 20:56 schrieb Stephan Budach:
I don't know… it seems to have serious issues with the MTU specifically…
root@nfsvmpool01:~# dladm show-phys
LINK MEDIA STATE SPEED DUPLEX DEVICE
igb0 Ethernet up 1000 full igb0
igb1 Ethernet unknown 1000 full igb1
igb2 Ethernet unknown 0 half igb2
igb3 Ethernet unknown 0 half igb3
ixgbe2 Ethernet down 0 unknown ixgbe2
ixgbe0 Ethernet up 10000 full ixgbe0
ixgbe3 Ethernet up 10000 full ixgbe3
ixgbe1 Ethernet down 0 unknown ixgbe1
root@nfsvmpool01:~# dladm show-linkprop -p mtu
LINK PROPERTY PERM VALUE DEFAULT POSSIBLE
igb0 mtu rw 1500 1500 60-9000
igb1 mtu rw 1500 1500 60-9000
igb2 mtu rw 1500 1500 60-9000
igb3 mtu rw 1500 1500 60-9000
ixgbe2 mtu rw 1500 1500 1500-15500
ixgbe0 mtu rw 1500 1500 1500-15500
^C
So, dladm shows the phys status, but it isn't able to tell me about
the MTU of ixgbe3…?
Needless to mention that ipadm also doesn't work. I will try to reset
the MTU back to 1500 again and seem if I can get the interface back.
Now, this one… I don't get it. ;)
root@nfsvmpool01:~# ipadm create-if ixgbe3
root@nfsvmpool01:~# ipadm show-if
IFNAME STATE CURRENT PERSISTENT
lo0 ok -m-v------46 ---
igb0 ok bm--------46 -46
ixgbe0 ok bm--------46 -46
ixgbe3 down bm--------46 -46
root@nfsvmpool01:~# ipadm create-addr -T static -a 192.168.1.1/24
ixgbe3/v4static
root@nfsvmpool01:~# ping 192.168.1.2
192.168.1.2 is alive
root@nfsvmpool01:~# dladm show-linkprop -p mtu
LINK PROPERTY PERM VALUE DEFAULT POSSIBLE
igb0 mtu rw 1500 1500 60-9000
igb1 mtu rw 1500 1500 60-9000
igb2 mtu rw 1500 1500 60-9000
igb3 mtu rw 1500 1500 60-9000
ixgbe2 mtu rw 1500 1500 1500-15500
ixgbe0 mtu rw 1500 1500 1500-15500
ixgbe3 mtu rw 9216 1500 1500-15500
ixgbe1 mtu rw 1500 1500 1500-15500
I do have a OmniOS 012 system, where all this works without these issues… ;)
Now, I won#t change the mtu that soon again, I guess…
Cheers,
budy
_______________________________________________
OmniOS-discuss mailing list
[email protected]
http://lists.omniti.com/mailman/listinfo/omnios-discuss
