hi timothy, when you say BIOS ROM reads, do you mean that the INT10 BIOS is going to sit in the PROM with the xilinx image? does anything else go in there?
what is the manuf/part # for the PROM (i could not find it in the BOM)? in the pinout email: http://lists.duskglow.com/open-graphics/2005-October/004121.html the interface to the PROM is not spec'ed. i did not find it in the archives, can you send it along or point me to it? thanks... arthur On Thu, Jan 12, 2006 at 01:44:03PM -0500, Timothy Miller wrote: > Yes. That bit hasn't even been started. > > We need an SPI PROM reader/programmer, and connected to that, we'll > have the PCI interface and a Xilinx programmer. The SPI PROM reader > needs to be able to service both programming and BIOS ROM reads at the > same time (interleaved, of course). > > On 1/12/06, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote: > > hi all, i've just started having a look at the > > code in this project and some of the list archives. > > i noticed in the archives a call for help with > > the xilinx fpga loader from the lattice chip, but > > no code yet in the svn repository. does this module > > still need work? if so, i can give it a go. i was > > unable to find the schematic in the archives, i would > > prob need that to get started... > > > > arthur > > _______________________________________________ > > Open-graphics mailing list > > [email protected] > > http://lists.duskglow.com/mailman/listinfo/open-graphics > > List service provided by Duskglow Consulting, LLC (www.duskglow.com) > > _______________________________________________ Open-graphics mailing list [email protected] http://lists.duskglow.com/mailman/listinfo/open-graphics List service provided by Duskglow Consulting, LLC (www.duskglow.com)
