On Tue, 2006-02-28 at 17:16 -0500, Timothy Miller wrote: > Howard found an FPGA-based graphics kit board on Xilinx's web site. > It's based on a Spartan 2, not much memory, etc. It goes for $1500. > I think it's on the avnet site below. > > Avnet (avnet.com) makes a bunch of FPGA-based boards. If this URL > doesn't work for you, this is under EM Home > Products > Design > Resource Center. > > http://www.em.avnet.com/evk/home/0,1719,RID%253D0%2526CID%253D0%2526CCD%253DUSA%2526SID%253D4742%2526DID%253DDF2%2526LID%253D18806%2526PVW%253D%2526BID%253DDF2%2526CTP%253DEVK,00.html
Hm. I was looking for FPGA dev boards with graphics output quite a while ago for an internal project, and this was the best I found: http://www.em.avnet.com/evk/home/0,1719,RID%253D7554%2526CID%253D7816%2526CCD%253DUSA%2526SID%253D7546%2526DID%253DADA%2526SRT%253D1%2526LID%253D7553%2526PVW%253D%2526BID%253DDF2%2526CTP%253DEVK,00.html The prices ranges from $400 to $600, depending on the size of Spartan-3 you get. It also has a bunch of other neat stuff, like serial ports and an Ethernet port. I don't think the stuff you are looking at is all that representative of what you can get if you look hard enough. Cheers, Ray _______________________________________________ Open-graphics mailing list [email protected] http://lists.duskglow.com/mailman/listinfo/open-graphics List service provided by Duskglow Consulting, LLC (www.duskglow.com)
