> > One could write the mode into some sort of NVRAM on the board, but if > > this is the system console, you have a catch-22. You need a display to > > show you what you are about to write to the board that controls the display. > > You can always put the card into a PC in which it won't be the primary > display and you can use the NVRAM or flash it with videobios or fpga > binary which will implement your specific monitor timing right after boot.
That is probably acceptable for most users of the OGD board. It will not be acceptable for OGC users. _______________________________________________ Open-graphics mailing list [email protected] http://lists.duskglow.com/mailman/listinfo/open-graphics List service provided by Duskglow Consulting, LLC (www.duskglow.com)
