http://www.ixo.de/info/usb_jtag/
Also, http://www.nslu2-linux.org/wiki/HowTo/RecoverFromABadFlashUsingJTAG refers to a parallel cable from Digilent, but that ppage also has a USB JTAG cable for $38: http://www.digilentinc.com/Products/Detail.cfm?Prod=JTAG-USB&Nav1=Products&Nav2=Cables Is it possible (or necessary) to write a driver for that cable to program Xilinx chips? On 2/7/07, Koen De Vleeschauwer <[EMAIL PROTECTED]> wrote:
The Xilinx Platform cable USB (Xilinx partno: HW-USB-G) costs 149$ from Avnet (, 149 Euro from Trenz Elektronik ( http://shop.trenz-electronic.de/ ). Works with ISE release 6.3.03i and higher. regards, koen > The only referneces i found there was either to Wiggler type > cables (using the parallel port) or to BDI2000 (which is a > full fledged debugger and costs >2000EUR). > _______________________________________________ Open-graphics mailing list [email protected] http://lists.duskglow.com/mailman/listinfo/open-graphics List service provided by Duskglow Consulting, LLC (www.duskglow.com)
_______________________________________________ Open-graphics mailing list [email protected] http://lists.duskglow.com/mailman/listinfo/open-graphics List service provided by Duskglow Consulting, LLC (www.duskglow.com)
