On 4/16/08, Dieter <[EMAIL PROTECTED]> wrote: > Ok, maybe something like: > > Dual graphics heads > > head 0: dual-link DVI-D port (digital only, up to 2560x1600) > s-video port (analog TV-out, up to AAAxBBB) > > head 1: dual-link DVI-I port (digital and analog) > digital up to 2560x1600 > > 330MHz RGB/VGA triple DAC (analog at least [EMAIL PROTECTED])
I added something like this. > > Support for a user-added 100-pin connector (through-hole soldering required) > supplying 68 user I/O signals. [ and 32 grounds? ] > I believe that many users will actually want to use the through-holes directly. The IDC connector is most useful if you want to connect OGD1 to some other device (like another OGD1) via a ribbon cable. (I'm not sure if all pins are connected, but those that are not signals will be power and ground, usually more ground than power.) -- Timothy Normand Miller http://www.cse.ohio-state.edu/~millerti Open Graphics Project _______________________________________________ Open-graphics mailing list [email protected] http://lists.duskglow.com/mailman/listinfo/open-graphics List service provided by Duskglow Consulting, LLC (www.duskglow.com)
