There are few 3.3v pci motherboards, although they should work at 66Mhz.
The efika board works great with CruxPPC linux see references below:
StarTech PCI Express to PCI Adapter Card Model PEX1PCI1 works excelente.
You could find some insightful info for a similar board in:
http://www.versamedium.com/pci/serrano.html
regards,
Joel
On 11/09/2012 04:26 AM, michele wrote:
On Thu, Nov 08, 2012 at 09:53:24PM +0100, "Ing. Daniel Rozsnyó" wrote:
You might read the datasheet again, as I was told, the device can
connect to the PCI bus only by one specific io bank (bank 2?) - only
those pins contain the protection diodes.
Thank you, checking...
And - do you really need 5V tolerance? Those ports are today hard to find.
All pc mother board looks to be 5V
Michele Carla'
_______________________________________________
Open-graphics mailing list
[email protected]
http://lists.duskglow.com/mailman/listinfo/open-graphics
List service provided by Duskglow Consulting, LLC (www.duskglow.com)
_______________________________________________
Open-graphics mailing list
[email protected]
http://lists.duskglow.com/mailman/listinfo/open-graphics
List service provided by Duskglow Consulting, LLC (www.duskglow.com)
