El 29/04/2008, a las 18:23, Mike Christie escribió:
>>> Apr 29 10:24:40 vz-10 kernel: scsi1 : iSCSI Initiator over TCP/IP >>> Apr 29 10:24:41 vz-10 kernel: Vendor: IFT Model: A16E- >>> G2130-4 Rev: 361F >>> Apr 29 10:24:41 vz-10 kernel: Type: Direct- >>> Access ANSI SCSI revision: 04 >>> Apr 29 10:24:41 vz-10 kernel: SCSI device sdb: 629145600 512-byte >>> hdwr sectors (322123 MB) >>> Apr 29 10:24:41 vz-10 kernel: sdb: Write Protect is off >>> Apr 29 10:24:41 vz-10 kernel: SCSI device sdb: drive cache: write >>> back >>> Apr 29 10:24:41 vz-10 kernel: SCSI device sdb: 629145600 512-byte >>> hdwr sectors (322123 MB) >>> Apr 29 10:24:41 vz-10 kernel: sdb: Write Protect is off >>> Apr 29 10:24:41 vz-10 kernel: SCSI device sdb: drive cache: write >>> back >>> Apr 29 10:24:41 vz-10 iscsid: connection1:0 is operational now >>> Apr 29 10:24:44 vz-10 udevd-event[23432]: wait_for_sysfs: waiting >>> for '/sys/devices/platform/host1/session1/target1:0:0/1:0:0:0/ >>> ioerr_cnt' failed >>> Apr 29 10:25:06 vz-10 iscsid: Nop-out timedout after 15 seconds on Dear Srs, The problem has been solved disabling Jumbo Frames in the Infortrend target. Linux has Jumbo Frames enabled with 9000 bytes MTU, and the switch has this feature enabled.. very curious :-/ Regards, -- Santi Saez --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "open-iscsi" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/open-iscsi -~----------~----~----~----~------~----~------~--~---
