Hi,
  Using open-iscsi-2.0.869-8.1  (x86_64) on a SUSE 11.0 based machine,
connecting to an HP D2D.

  Generally operation seems fine but I have some issues:-

  I cannot get the system to reconnect as start, if I configure open-isci to
start at boot
  the system hangs, I have to do a force reboot and boot single user, configure
open-iscsi to off.
  Starting open-iscsi by hand always works,  but login appears to work on two
interfaces only.

  Messages displayed during manual start:-

etc/init.d/open-iscsi start
Starting iSCSI initiator service:
done
Setting up iSCSI targets: Logging in to [iface: default, target:
iqn.1986-03.com.hp:storage.d2dbs.hu191248n0.500110a0002b2aa6.autoloader2.drive,
portal: 192.168.2.85,3260]

Logging in to [iface: iser, target:
iqn.1986-03.com.hp:storage.d2dbs.hu191248n0.500110a0002b2aa6.autoloader2.drive,
portal: 192.168.2.85,3260]               
Logging in to [iface: default, target:
iqn.1986-03.com.hp:storage.d2dbs.hu191248n0.500110a0002b2aac.autoloader2.robotic
s, portal: 192.168.2.85,3260]         
Logging in to [iface: iser, target:
iqn.1986-03.com.hp:storage.d2dbs.hu191248n0.500110a0002b2aac.autoloader2.robotic
s, portal: 192.168.2.85,3260]
Login to [iface: default, target:
iqn.1986-03.com.hp:storage.d2dbs.hu191248n0.500110a0002b2aa6.autoloader2.drive,
portal: 192.168.2.85,3260]: successful
Login to [iface: default, target:
iqn.1986-03.com.hp:storage.d2dbs.hu191248n0.500110a0002b2aac.autoloader2.robotic
s, portal: 192.168.2.85,3260]: successful

  I can change the constraints in the startup to start open-iscsi after
everything else and it will
  still hang.
  Could the failure to connect on the iser interfaces be a cause of the failure
to start at boot?
  If so is there a way to disable the iser interfaces and stick with the tcp
connections?

  Another problem was uncovered when a real local tape drive was added, while
status messages suggsted that
  the open-iscsi interfaces hand changed from using /dev/st0 to /dev/st1 the
system would not actually
  work correctly. I have not tried a reinstall yet, but removal of the offending
local drive let the system
  work sensibly again.

  Cheers,
    Stuart
                                


--

You received this message because you are subscribed to the Google Groups 
"open-iscsi" group.
To post to this group, send email to open-is...@googlegroups.com.
To unsubscribe from this group, send email to 
open-iscsi+unsubscr...@googlegroups.com.
For more options, visit this group at 
http://groups.google.com/group/open-iscsi?hl=en.


Reply via email to