Yeah, I believe this is an issue to be handled at iscsitarget rather than the initiator. So I have moved the query to iscsitarget mailing list. Thanks for guiding me to that list.
Regards, Aastha. On 27 February 2011 04:54, Arne Redlich <[email protected]> wrote: > 2011/2/26 Aastha Mehta <[email protected]>: > > I checked on the iscsitarget as well. The errors are coming from > iscsitarget > > layer. No problems seem to occur in fuse-dfs. > > IET doesn't do anything fancy - it just calls the kernel's > filp_open(O_RDWR|O_LARGEFILE), which returns an error. Can you send > your IET configuration and the contents of your syslog > (/var/log/syslog or /var/log/messages depending on your distribution) > when starting up IET? > > Anyway, this is obviously not an open-iscsi issue, so unless the > information requested above immediately points to the cause of the > issue, the better place to discuss this our iscsitarget-devel mailing > list: > https://lists.sourceforge.net/lists/listinfo/iscsitarget-devel > > Unfortunately it requires subscription before posting to keep out spam. > > HTH, > Arne > > > On 26 February 2011 17:26, Arne Redlich <[email protected]> > wrote: > >> > >> 2011/2/25 Mike Christie <[email protected]>: > >> > On 02/24/2011 11:11 PM, Aastha Mehta wrote: > >> >> > >> >> I have also tried stopping and starting again. I still get the same > >> >> kind > >> >> of > >> >> errors. > >> > > >> > I was not saying the "restart" was the problem. I was saying that when > >> > you > >> > startup again and get these messages below is indicating there is a > >> > problem > >> > and that problem might be preventing the target from starting ok > again. > >> > When > >> > you do stop and start on the start do you get the same target errors > >> > like > >> > below? > >> > > >> > > >> >>>> $dmesg > >> >>>> iscsi_trgt: fileio_attach(283) -5 > >> >>>> iscsi_trgt: Registered io type fileio > >> >>>> iscsi_trgt: Registered io type blockio > >> >>>> iscsi_trgt: Registered io type nullio > >> >>>> iscsi_trgt: open_path(119) Can't open > /media/myDrive/newhdfs/storage/ > >> >>>> lun3_2.img -5 > >> > >> IET cannot open the LUN file - filp_open returns -EIO. This looks like > >> an issue with your FUSE filesystem to me - does fuse-dfs provide any > >> error messages? > >> > >> HTH, > >> Arne > >> > >> > -- > >> > You received this message because you are subscribed to the Google > >> > Groups > >> > "open-iscsi" group. > >> > To post to this group, send email to [email protected]. > >> > To unsubscribe from this group, send email to > >> > [email protected]. > >> > For more options, visit this group at > >> > http://groups.google.com/group/open-iscsi?hl=en. > >> > > >> > > > > > > > > > -- > > Aastha Mehta > > Intern, NetApp, Bangalore > > 4th year undergraduate, BITS Pilani > > E-mail: [email protected] > > > > > > > -- Aastha Mehta Intern, NetApp, Bangalore 4th year undergraduate, BITS Pilani E-mail: [email protected] -- You received this message because you are subscribed to the Google Groups "open-iscsi" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/open-iscsi?hl=en.
