I've been able to install the R2R package, and have set up a couple of virtual hosts in jetty, mapping one to my ip address (http:// 65.41.16.20:8080/) and a different one to a named subdomain (http:// lunchboxmenus.muradaz.com:8080). I'm new at setting up a web app using WAR files, but as I understand it, I have to have a separate instance of the BD directories in each of my virtual host root directories, so that each one can be configured for the purposes of that app (as opposed to CF8 in Windows, where a single instance of the server app can be used across multiple virtual hosts). If I'm wrong about that, I'd appreciate any guidance on that aspect of configuration.
However, that's not my problem at the moment. With the separate instances of BD in the virtual hosts, things are working properly, but I was concerned with allowing open access to the admin interface, and thought I'd fix that by setting the allowedip value in the admin interface. For the ip address host, it worked fine to use my internal ip address range (192.168.1.*). However, for the named host, using that range (and even adding in the public ip address) results in a blank screen. I have to reset the values in bluedragon.xml and restart jetty to get back to that admin interface. I'm sure there's a way to do this, but I'm too new at tweaking configuration setttings to figure it out. Any advice/recommendations/ pointers, etc.would be greatly appreciated. Cheers, REM O- --~--~---------~--~----~------------~-------~--~----~ Open BlueDragon Public Mailing List http://groups.google.com/group/openbd?hl=en official site @ http://www.openbluedragon.org/ !! save a network - trim replies before posting !! -~----------~----~----~----~------~----~------~--~---
