I was in your shoes a couple of weeks ago. After alot of
scratching around with the Windows versions, here's what I've
found:
1) X-Win Pro Version 5.3 (that Richard mentioned) works with
both the cygwin and the Exceed versions, you will have to
do some key mapping with the Exceed version as some keys
on your keyboard do not function. I have yet to figure
out how to do this.
2) I have installed both the Exceed and Cygwin versions (as well
as the 3.whatever relic from IBM itself) on both 98, and NT. I
have noticed no problems but I am not in full use yet.
3) The instructions provided by Suhaib in the readme are correct
and complete, I suggest installing the Exceed version, the
downloads are quicker and the process is simple (there were
some unmentioned things I had to do for the Cygwin version):
1) Install X-server
2) unzip OpenDX files
3) reboot
4) open X session
5) Using the start menu
Start-Data Explorer-DX Program Editor
You'll make your life alot easier if you install to the C: drive
Regards
A. David Reynolds, Ph.D. Candidate
Groundwater Group
Department of Civil Engineering
Queen's University
Kingston, Ontario
Canada
K7L 3N6
613 533 2130 (v)
613 533 2128 (f)
A. David Reynolds, Ph.D. Candidate
Groundwater Group
Department of Civil Engineering
Queen's University
Kingston, Ontario
Canada
K7L 3N6
613 533 2130 (v)
613 533 2128 (f)
